PRO-MAG 200 AM - gas-cooled, SMB 15/4m, wire transport roll 0,8/1,0 mm

MIG soldering will offer you the decisive advantages.

Especially the car body industry must adapt its repair methods to ongoing changes. Car bodies made of fully galvanized partially high-strength steel must not be welded conventionally after an accident, as the intentional crash caracteristics precipitaded by the manufacturer might get lost.

Various automobile manufacturers prescribe the use of MIG soldering for repairs.

The PRO-MAG 200 AM is a combined device, especially designed for MIG-MAG welding of thin sheet steel and MIG soldering with an optimum price-performance ratio.

The PRO MAG 200 AM is serially delivered with a 4m MIG/MAG steel welding torch with a Ø0,8mm welding tip. For MIG soldering, the “MIG soldering kit to retool the welding torch” is required additionally.

The most important user functions of PRO-MAG control are:

• The standard 2-cycle and 4-cycle function for short basting or long welds. Fatigue-proof working is thus ensured for any welding tasks.
• With the integrated position and interval control, optically perfect point and slot welding or uniform, reproducible basting welds are no longer a challenge.
• An integrated creeping and striking automatic ensures a rapid and safe strike of the arcing.
• The feed automatic automatically adapts the wire speed over a large range with the step switch when the power decreases or increase so that it is not necessary to continuously regulate.
• The permanent control of the supply voltage with compensation of fluctuation ensures a smooth and steady arcing with optimum welding
  results.
• When the welding process is finished, the free arcing automatic ensures a constant wire length end, which safely prevents the wire from sticking to the workpiece or to the current nozzle.
  (may be adjusted individually)
• The threading automatic increases the feed speed when the wire is treaded automatically.
• The safety cutoff prevents from unintentional striking and unwinding of the welding wire during the K-cycle operation, as well as from the risk of fire which may result thereof.
• Individually adjustable after gas flow time which automatically adapts the after gas flow at the individual regulating steps. Thus the melting bath is protected after finishing the welding process until it is solidified.

serial equipment: 2T/4T/PI-motion, ergonomic welding torch 4 m with ball-and-socket joint, high-quality welding regulator with pressure- and capacity indicator, earthing wire 4m, 2-roller or 4-roller drive, supply main plug 5m, central connecting system Binze