PRO-MAG 350-4 - water-cooled,SMB 400/4m, wire transport roll 1,2 mm

The most important user functions of PRO-MAG control are:

• The standard 2-cycle and 4-cycle function for short basting or long welds. Fatigue-proof working is thus ensured for any welding tasks.
• With the integrated position and interval control, optically perfect point and slot welding or uniform, reproducible basting welds are no longer a challenge.
• An integrated creeping and striking automatic ensures a rapid and safe strike of the arcing.
• The feed automatic automatically adapts the wire speed over a large range with the step switch when the power decreases or increase so that it is not necessary to continuously regulate.
• The permanent control of the supply voltage with compensation of fluctuation ensures a smooth and steady arcing with optimum welding
  results.
• When the welding process is finished, the free arcing automatic ensures a constant wire length end, which safely prevents the wire from sticking to the workpiece or to the current nozzle.
  (may be adjusted individually)
• The threading automatic increases the feed speed when the wire is treaded automatically.
• The safety cutoff prevents from unintentional striking and unwinding of the welding wire during the K-cycle operation, as well as from the risk of fire which may result thereof.
• Individually adjustable after gas flow time which automatically adapts the after gas flow at the individual regulating steps. Thus the melting bath is protected after finishing the welding process until it is solidified.

serial equipment: 2T/4T/PI-motion, ergonomic welding torch 4 m with ball-and-socket joint, high-quality welding regulator with pressure- and capacity indicator, earthing wire 4m, 2-roller or 4-roller drive, supply main plug 5m, central connecting system Binze