• Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
Brandimage to Product

Lathe

TU

Leading screw lathes with feed gear for the demanding user. TU 2807V with brushless motor for stepless speed control

From 2.360,00 EUR excl. Tax / pc(s).
From 2.808,40 EUR incl. 19% Tax / pc(s).
Promotional price *
From 2.099,00 EUR excl. Tax / pc(s).
From 2.497,81 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 31.08.2021 in Germany.

Are you interested in this product?
  • Put a request
  • Find Trader
  • Variations

    Electric DataSpindleGeneral Price Promotional price *
    TitleArt.-No.Supply voltage (V)Tool holder max. chuck height (mm)VPE EUR excl. TaxEUR incl. 19% TaxEUR excl. TaxEUR incl. 19% Tax
    OPTIturn TU 2807 (230 V)34270012301212.360,002.808,402.099,002.497,81
    OPTIturn TU 2807 (400 V)342700340013.512.360,002.808,402.099,002.497,81
    Select Attributes
    Electric Data
    Spindle
    General
    Price
    Promotional price

    Productdetails

    • Precise processing
    • Powerful, maintenance-free engine
    • Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
    • Smooth-running feed gear with rounded gears running in an oil bath
    • Hardened and ground Z-axis guideway
    • Guaranteed concentricity of the spindle nose better than 0.009 mm
    • Concentricity on the lathe chuck better than 0.04 mm
    • Automatic longitudinal / lead screw drive
    • Lead screw for thread cutting or automatic longitudinal turning
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Right / left rotation in the control panel switchable
    • Hardened main spindle mounted in adjustable precision tapered roller bearings
    • Tapered roller bearings in P5 quality
    • Hardened spindle nose with Ø 26 mm spindle bore
    • Rolled trapezoid spindles
    • Chip protection on the upper slide
    • Upper slide on cross slide slidable
    • Tailstock for taper turning ± 5 mm adjustable
    • Tailstock quill and handwheel with adjustable fine scale 0.02 mm
    • Fast, easy and tool-free adjustment by means of a clamping lever
    • Leadscrew stored in two sintered bearings
    • Change gear set in standard scope of supply for thread cutting
    • Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
    • thrust bearing
    • 3-jaw lathe chuck in the standard scope of delivery
    • Emergency stop impact switch
    • Fully equipped, allowing the user to be productive immediately after commissioning

    TU 2807V

    • Quiet, powerful and brushless DC drive with excellent control characteristics
    • High precision steel lining for higher speeds
    • Speed change easily adjustable via potentiometer
    • Digital speed display

     

    Dimensions and weights
    Length approx.1370 mm
    Width/depth approx.640 mm
    Height approx.535 mm
    Weight approx.196 kg
    Electric Data
    Mains frequency50 Hz
    Feed
    Longitudinal feed range0.07 – 0.4 mm/rev
    Number of longitudinal feeds6
    Pitches
    Metric pitch0.2 – 3.5 mm/rev
    Number of metric pitches18
    Imperial pitch56 8 Threads/1"
    Number of imperial pitches21
    Speed range
    Number of gears6
    Speed range150 – 2000 min¯¹
    Spindle
    Spindle chuckshort taper
    Spindle bore/rod passage diameter26 mm
    Spindle coneMT 4
    Tailstock
    ChuckMT 2
    Quill stroke85 mm
    Travel
    Travel X axis60 mm
    Travel Z axis160 mm
    Work areas
    Max. height140 mm
    Max. width700 mm
    Swing diameter above machine bed266 mm
    Bed width180 mm
    Unit: pc(s).

     

     

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.