Productdetails
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose ≤ 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 5
- Motor protection switch
- Main motor electrically braked
- Clockwise/anticlockwise rotation switchable on the bed slide
- Two-channel safety electronics
- Switch with life cycle calculation tested in accordance with EN ISO 13849
- Perfectly concentric main spindle guarantees high load capacity due to mounted precision tapered roller bearings
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Safety handwheels with disengagement function in the X and Z axes
- All gear wheels of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
- Coolant pump with coolant tank and level indicator. Container can be removed for easy cleaning
- LED machine lamp in the machine housing
- Machine base in sturdy steel construction
- Emergency stop switch on the right and left
- Lockable main switch
- Three-jaw lathe chuck included in the scope of delivery
| Cooling lubricant system |
|---|
| Coolant pump output | 100 W |
| Dimensions and weights |
|---|
| Length approx. | 1935 mm |
| Width/depth approx. | 780 mm |
| Height approx. | 1740 mm |
| Weight approx. | 765 kg |
| Electrical connections |
|---|
| Total rated value | 3,0 kW |
| Electrical Data |
|---|
| Drive motor output | 2,2 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed |
|---|
| Longitudinal feed range | 0,014 – 0,38 mm/rev |
| Number of longitudinal feeds | 26 |
| Flat feed range | 0,052 – 1,392 mm/rev |
| Number of flat feeds | 32 |
| Pitches |
|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 32 |
| Imperial pitch | 56 – 4 Gg/1" |
| Number of imperial pitches | 31 |
| Speed range |
|---|
| Number of gears | 8 |
| Speed range | 70 – 2000 min¯¹ |
| Spindle |
|---|
| Spindle chuck | Camlock DIN ISO 702-2 No.5 |
| Spindle bore/rod passage diameter | 53 mm |
| Tool holder | SWH 3-E |
| Spindle cone | MT 6 |
| Tailstock |
|---|
| Chuck | MT 4 |
| Quill stroke | 110 mm |
| Tool clamping |
|---|
| Tool holder chuck size | 16 mm |
| Travel |
|---|
| Travel upper slide | 98 mm |
| Travel cross slide | 185 mm |
| Travel carriage saddle | 850 mm |
| Work areas |
|---|
| Max. height | 200 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 400 mm |
| Swing diameter above planing slide | 250 mm |
| Explanation Swing diameter above planing slide | Please note that when installing third-party lathe chucks or faceplates to achieve the specified technically possible turning diameter, operator modifications are required. |
Unit: pc(s).
Packaging unit: 1
- Three-jaw lathe chuck Ø 200 mm, no. 5
- Quick change tool holder 3-E
- Fixed steady 7 - 102 mm
- Travelling steady 10 - 60 mm
- Reduction sleeve MT 6 - MT 4
- Fixed centre MT 4
- Machine initially filled with premium grade oil
- Operating tool
