- Standard with high-quality bi-metal saw band
- Adjustable material stop for serial work
- Pushbutton for the saw blade running switches the run of the saw blade on and off
- Base plate with non-slip feet
- Low vibration and low wear due to special gearbox with two hardened steel gears
- Low-speed Vario drive motor with carbon brushes for up to 10 times longer service life
SP 11V
- Saw bar can be swiveled from 0 ° to + 45 ° to allow angled saw cuts
SP 13V
- Saw bar can be swiveled from 0 ° to + 60 ° to allow angled saw cuts
The metal band saw (frequency converter) complies with the standard DIN EN 55011: Class C2
Cutting ranges |
---|
0° round (full material) | 105 mm |
0° quadratic (full material) | 100 mm |
0° rectangle horizontal (full material) | 100 x 100 mm |
0° rectangle horizontal vertical cut | 100 x 100 mm |
+45° round (full material) | 65 mm |
+45° quadratic (full material) | 60 mm |
+45° rectangle horizontal (full material) | 60 x 65 mm |
Explanation Cutting range | The cutting range was determined with aluminum. It can vary when using different materials and may be smaller under certain circumstances (not cutting capacity). |
Dimensions and weights |
---|
Max. width/depth | 670 mm |
Max. height | 630 mm |
Length approx. | 650 mm |
Width/depth approx. | 290 mm |
Height approx. | 450 mm |
Weight approx. | 19 kg |
Electrical Data |
---|
Drive motor output | 0,85 kW |
Supply voltage | 230 V |
Mains frequency | 50 Hz |
Machine data |
---|
Saw band speed(s) | 30 – 80 m/min |
Saw band length | 1335 mm |
Saw band width | 13 mm |
Saw band thickness | 0,65 mm |
Cutting angle | 0 – 45 ° |
Unit: pc(s).
Packaging unit: 1
- Bi-metal saw band
- material stop