• Productimage for KOMBI 270
  • Productimage for KOMBI 270
  • Productimage for KOMBI 270
  • Productimage for KOMBI 270
Brandimage to Product KOMBI 270

Multifunction inverter


For MIG/MAG, TIG and electrode welding. Lightweight and robust, ideal for use on construction sites

2.509,00 EUR excl. Tax / pc(s).
2.985,71 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1087055

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    Basic Features


    • MIG/MAG
    • TIG DC with LIFT-ARC
    • Welding electrodes
    • Cored wire welding without gas

    Sheet thicknesses

    • TIG from approx. 1 mm
    • MIG/MAG from approx. 1 mm
    • Electrodes from approx. 2 mm

    Base materials

    • Low-alloyed materials
    • High alloyed materials
    • Structural steels
    • Coated structural steels
    • CrNi steels ferritic / austenitic
    • Duplex steels
    • Nickel-based materials
    • Copper
    • Aluminum
    • Special materials

    Typical applications

    • Plant, container, machine and steel construction
    • Maintenance/repair
    • Vehicle construction / construction machinery
    • Industrial plant and pipeline construction
    • Construction site and assembly



    Hot start function

    • Ignition aid for the ignition of the arc of a rod electrode during electrode welding. Due to an automatic short-term increase in the welding current, the arc immediately ignites stable.

    Arc Force Control

    • The Schweisskraft is kept as constant as possible during electrode welding at the set value. The arc burns stable, even with difficult electrodes or positions, the welding result is more even.

    Anti-stick function

    • In the case of a sticky operation of the electrode on the workpiece, the welding current is switched off. The electrode does not glow and can be easily detached from the workpiece.

    Pulses in TIG function with pulse box

    • Welding faults at the seam beginning and end of the seam, e.g. in pipe welding, are avoided by pulses.

    MIG welding without bottle

    • More wide application area thanks to the possibility of using filling wires, thus allowing MIG welding, e.g. on construction sites without a gas cylinder, a great plus in mobility.

    Lift Arc Ignition

    • Tear ignition during TIG welding with a minimum current. Only after the ignition of the arc is the set welding current released.

    Adjustable electronic throttle

    • For optimal adjustment of arcs depending on requirements from hard to soft.


    • MIG/MAG
    • Electronic throttle
    • WIG LIFT-ARC und HF ignition
    • MIG/MAG Adjustment range 15 – 270 A
    • For electrodes up to 6.0 mm


    Dimensions and weights
    Length approx.760 mm
    Width/depth approx.228 mm
    Height approx.475 mm
    Weight approx.26.5 kg
    Duty cycle
    at Imax. 40°C MIG/MAG50 %
    at Imax. 40°C TIG DC70 %
    at Imax. 40°C electrode60 %
    Current at 100% DC 40°C MIG/MAG180 A
    Current at 100% DC 40°C TIG DC210 A
    Current at 100% DC 40°C electrode195 A
    Electrical Data
    Supply voltage3 x 400 V
    Mains frequency50/60 Hz
    Weldable electrodes1.6 - 6.0 mm
    Power consumption
    Power consumption MIG/MAG6,4 kVA
    TG DC5.6 kVA
    Electrode8.0 kVA
    Setting range
    Setting range MIG/MAG15 – 270 A
    Electrode5 – 250 A
    TIG DC5 – 250 A
    Standards and certifications
    StandardEN 60 974-1; -10
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    MarkingCE, S
    Wire feed
    Wire feed unit4 Rollers
    Unit: pc(s).
    Packaging unit: 1

    • Conveyor rollers 1.0/1.2 mm


    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.