• Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
  • Productimage for BARRACUDA 65i with torch Pluscut 85
Brandimage to Product BARRACUDA 65i with torch Pluscut 85

Plasma Cutting Machine

BARRACUDA 65i with torch Pluscut 85

Efficient and powerful

1.998,00 EUR excl. Tax / pc(s).
2.377,62 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1301065

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Mobility, maximum economic efficiency and first-class cutting quality are the special features of the REHM plasma cutting systems.
    • The new compact BARRACUDA® is available in two sizes and four performance classes
    • Large dimensioned performance components and 100 percent tested quality guarantee the reliability of the BARRACUDA®.

    Universally applicable

    • For unalloyed and high-alloyed steels, aluminum, copper, brass, bronze, nickel, non-ferrous metals and all other electrically conductive metals, also with painted surfaces
    • Optimum cutting quality and cut quality
    • Through precisely controlled, infinitely adjustable cutting current
    • Through optimized plasma cutting torches
    • With high power reserves - even at the critical end of the cut

    Economical

    • Immediate start of cutting, the material can be cut without prior heating
    • High cutting speed combined with long tool life and best cutting quality
    • No technical gas required, only compressed air

    Mobile

    • Suitable for use on generator
    • Compact design
    • Optimally portable on sturdy handle and a light weight

    BARRACUDA® 45i with POWER FACTOR CONTROLLER (PFC)

    • Compliance with the new regulation EU 2019/1784
    • Highest energy efficiency
    • Worldwide use
    • Clean mains power consumption
    • Can be used anywhere

    BARRACUDA® 45i with Eurocentral connection
    BARRACUDA® 65i/105i/125i Connection of plasma torches via TRAFIMECTOR®: With 140 mm projection, one of the most compact connections on the market. Allows torch to be changed without tools.

    • No tools required
    • Can be operated with one hand
    • The connection is designed for 160A
    • TRAFIMECTOR® is connected with maximum operator safety

     

    Cutting performance
    Quality cutting steel (ST37) approx.25 mm
    Separating cut steel (ST37) approx.30 mm
    Quality cutting stainless steel approx.25 mm
    Separating cut stainless steel approx.30 mm
    Quality cutting aluminium approx.20 mm
    Separating cut aluminium approx.22 mm
    Device data
    Air consumption140 l/min
    Pressure5 bar
    Dimensions and weights
    Length approx.740 mm
    Width/depth approx.260 mm
    Height approx.484 mm
    Weight approx.26.5 kg
    Duty cycle
    Duty cycle plasma90 %
    Current at 100% DC 40°C Plasma61 A
    Electrical connections
    Input current16.7 A
    Electrical Data
    Supply voltage400 V
    Mains frequency50/60 Hz
    Setting range
    Adjusting range plasma20 – 65 A
    Standards and certifications
    StandardEN 60974-1:2012, EN 60974-10:2014
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    MarkingCE
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Plasma torch Pluscut 85
    • Ground cable 8mm² 4m with 300A ground clamp

     

    LC display5 "
    Pilot ARC control
    2-stroke function
    4-stroke function

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.