• Productimage for CRAFT-CUT PRO 83
  • Productimage for CRAFT-CUT PRO 83
  • Productimage for CRAFT-CUT PRO 83
  • Productimage for CRAFT-CUT PRO 83
Brandimage to Product CRAFT-CUT PRO 83

Plasma cutting equipment

CRAFT-CUT PRO 83

For the strictest requirements

Price upon request

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 1365083

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Suitable for use on the generator e.g. in operating workshops, ports, chemical plants, schools, metal construction, on construction sites, ships or for farmers
    • Quiet running fans with good heat dissipation for high duty cycles
    • For stainless steel, aluminum, steel, non-ferrous metals also with painted surface
    • From thin sheets to heavy plates
    • Pilot ARC-Controller: Only after ignition of the arc the set welding current is released
    • With 2- and 4-stroke function
    • CRAFT-CUT PRO 41P with power factor correction PFC for trouble-free use also on cable reel
    • Precise setting and display of welding parameters via LC display
    • Integrated pressure reducer for setting the cutting pressure

     

    Cutting performance
    Quality cutting steel (ST37) approx.30 mm
    Separating cut steel (ST37) approx.35 mm
    Quality cutting stainless steel approx.30 mm
    Separating cut stainless steel approx.35 mm
    Quality cutting aluminium approx.25 mm
    Separating cut aluminium approx.30 mm
    Device data
    Air consumption160 l/min
    Pressure5 bar
    Dimensions and weights
    Length approx.740 mm
    Width/depth approx.260 mm
    Height approx.484 mm
    Weight approx.28.5 kg
    Duty cycle
    Duty cycle plasma60 %
    Current at 100% DC 40°C Plasma65 A
    Electrical connections
    Input current20.9 A
    Electrical Data
    Supply voltage400 V
    Mains frequency50/60 Hz
    Setting range
    Adjusting range plasma20 – 80 A
    Standards and certifications
    StandardEN 60974-1:2012, EN 60974-10:2014
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    MarkingCE
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Plasma torch Pluscut 85 6m
    • Ground cable 4 m, 12 mm² with ground clamp 300 A

     

    LC display5 "
    Pilot ARC control
    Sealed board
    Perforated plate function
    Gouging function
    2-stroke function
    4-stroke function

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.