Productimage for CASADEI LIBRA 65/2 RTC 135
Brandimage to Product CASADEI LIBRA 65/2 RTC 135

Wide belt sander

CASADEI LIBRA 65/2 RTC 135

As a two- or three-band version with a grinding width of up to 1350 mm for maximum productivity and higher demands, optionally with transverse sanding unit

Price upon request

Prices are recommended retail prices, for which existing promotional offers have not been taken into account. Retailer prices may vary.

Art.-No. 5222506

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • High-quality results in the processing of solid wood, veneer or raw material as well as for lacquer sanding
    • Heavy version of the entire machine
    • Operator panel with dust-tight membrane keypads on the front of the machine
    • Optimum cooling and long durability of the sanding belts (sanding belt length 2620 mm)
    • Automatic star-delta start
    • Motorized table height adjustment
    • Digital display for the working height
    • Electronically controlled grinding belt oscillation with reduced compressed air requirement
    • Natural rubber feed carpet with negative profile
    • Automatic carpet centering
    • Support table with two rollers in the infeed and outfeed of the feed carpet
    • Rubber rollers, in front of and behind each working unit
    • Flexible steel pressure rail in front of the first unit
    • Carpet feed via gear motor with two speeds
    • Pneumatic belt tension per unit with decimal correction possibility of the grain / belt thickness
    • Functional check on the control panel for circuit breaker, thermal protection switch, operating pressure and brakes
    • Optional RTC / RRTC design with planer shaft unit instead of the first sanding unit (with 520 indexable inserts with four cutting edges each)



    Execution RRR

    • 1. Unit R With diagonally grooved steel roller Ø 140 mm and fine adjustment
    • 2. Aggregate R with rubber-coated roller 65 Sh Ø 140 mm and fine adjustment
    • 3. Aggregate R with rubber-coated roller 45 Sh Ø 250 mm and fine adjustment


    Execution RRTC

    • 1. Unit R With diagonally grooved steel roller Ø 140 mm and fine adjustment
    • 2. Aggregate R with rubber-coated roller 65 Sh Ø 140 mm and fine adjustment
    • 3. Combination unit TC with rubber-coated roller 45 Sh Ø 140 mm and fine adjustment
    • Hard sanding pad (with screwed on graphite pad on exchangeable insert, fine adjustment
    • Switching the sanding shoe on / off from the control panel via pneumatic cylinder

     

    Dimensions and weights
    Length1900 mm
    Width/depth2195 mm
    Height2390 mm
    Dust extraction port
    Extraction port diameter2 x 200 mm
    Electric Data
    Height adjustment motor power0.25 kW
    Feed motor output0.45/0.8 kW
    Drive motor output11 kW
    Supply voltage400 V
    Mains frequency50 Hz
    Feed unit
    Feed speed4.5 / 9 m/min
    Sanding machine
    Sanding belt length2620 mm
    Sanding belt width1370 mm
    Max. sanding width1350 mm
    Workpiece
    Min. height4 mm
    Max. height170 mm
    VPE1

    Wird in der Artikelbeschreibung und/oder in der Beschreibung des Lieferumfangs eine Garantie ausgewiesen, bleiben Ihre gesetzlichen Mangelhaftungsrechte Ihrem Verkäufer gegenüber hiervon unberührt. Umfang, Dauer, Inhalt und den Garantiegeber entnehmen Sie bitte den Garantiebedingungen.