• Productimage for AIRPROFI 703/270/15 VK
  • Productimage for AIRPROFI 703/270/15 VK
  • Image to display Videos
Brandimage to Product AIRPROFI 703/270/15 VK

Stationary piston compressor (15 bar)

AIRPROFI 703/270/15 VK

Stationary compressors with stationary or horizontal tank, for an operating pressure above 10 bar

3.950,00 EUR excl. Tax / pc(s).
4.700,50 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 2024752K

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
    • Large fan ensures optimal cooling
    • Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
    • High quality electric motor with high torque
    • Electric motor equipped with motor protection switch
    • Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
    • Flexible armored hose line with heat protection prevents vibration breakage
    • High-quality CONDOR pressure switch as standard
    • From 7.5 kW as standard with star-delta switch with operating hours counter
    • Ready for connection with all fittings

    Additional equipment K-version:

    • Refrigerated dryer with integrated automatic steam trap for dry compressed air, longer service life of compressed air tools and avoidance of disturbances in pneumatic controls
    • Fine filter for separating condensate and solid impurities with particles up to 1 μ in front of the refrigeration dryer

    Equipment

    • Automatic steam trap on the compressed air tank
    • No unnecessary pressure loss

    • Condensate conditioner for oil-water separation
    • Important notes on condensate treatment can also be found in the section on compressed air preparation.

    • Fine filter for separating condensate and solid impurities with particles up to 1 μm
    • Compressed air quality according to ISO 8573-1
    • As a pre-filter in front of the refrigeration dryer

    • Refrigerated dryer with integrated automatic steam trap
    • Pressure dew point at 5 °C, ambient temperature 25 °C, atmospheric dew point at -22 °C

     

    Compressed air tank
    Maximum pressure13(15) bar
    Pressure vessel capacity270 l
    Compressor
    Compressor systemHOS
    Suction capacity approx.575 l/min
    Filling capacity approx.460 l/min
    Explanation filling capacityat 6 bar working pressure
    Number of cylinders2
    Number of compressor stages2
    Dimensions and weights
    Length approx.1200 mm
    Width/depth approx.800 mm
    Height approx.1970 mm
    Weight approx.194 kg
    Electrical Data
    Delivery power4 kW
    Supply voltage400 V
    Mains frequency50 Hz
    Noise emission
    Sound pressure level Lp83 dB(A)
    Explanation sound pressure level LpSound pressure level at 1 m distance according to DIN 45635 T 13
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Two-stage compression two-cylinder high-performance unit
    • Refrigerated dryer with integrated automatic steam trap
    • Toothed drive belts
    • Automatic CONDOR pressure switch
    • Power plug with phase inverter for manual reversal of the direction of rotation
    • 1 pressure gauge for tank pressure
    • 1 ball valve on the boiler
    • Flexible armored hose line with heat protection
    • Internally and externally hot-dip galvanized compressed air tank
    • 1x 3/8 inch ball valve at the lower tank outlet for drainage
    • Three compressed air extraction points on the boiler
    • safety valve
    • Ready for connection with all fittings
    • Shock mounts
    • Security booth range

     

    Pressure regulationPressure regulator
    Automatic pressure switchCONDOR
    Drive transmissionV-belt
    Material compressed air lineFlexible armored conduit with heat protection
    Compressed air treatmentFine filter, refrigeration dryer AD 36
    Compressed air outletBall valve
    Pressure vesselHot-dip galvanized inside and outside with a fifteen-year guarantee against rust
    Compressor baseSwing elements, safety stand pallet

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.