CRAFT-TIG 201 AC/DC P PULSE Set 2

For workshop and mobile use

2.766,39 EUR excl. Tax / pc(s).
3.292,00 EUR incl. 19% Tax / pc(s).

Promotional price *

2.579,00 EUR excl. Tax / pc(s).
3.069,01 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.

Sicherheits- und Warnhinweise

Safety and warning notices

Art.-No. 1074202SET2

Are you interested in this product?

Put a request

Find Trader

Productdetails

Basic Features

Sheet thicknesses

0.5 – 10

Description

Built with modern inverter technology
Ideally suited for assembly work due to protection class IP 21S generally also for outdoor work
Universally applicable for welding of all common electrode types
TIG pulsing enables welding with reduced heat input
HF high frequency ignition ignites during TIG welding without touching the workpiece
Quiet running fans dissipate heat well from the equipment for long duty cycles
Time controlled fan with stand-by mode
Adjustable balance
Precise setting of welding parameters via digital display
Device equipped with PFC (power factor correction), enables best use even on cable drums
Optional with water cooling
Multivoltage from 110 to 230 volts
Nine programs can be stored
AC triangle wave welding output: reduced heat input for the same current setting, especially useful for welding thin metal
AC Sine Wave Welding Output: Traditional AC TIG welding waveform, quieter, "softer" arc characteristics.
AC square wave: focused arc for maximum penetration, fast travel speed with best directional control
MMA mode with hot-start and arc-force control
Adjustable welding curve

You will receive the 3-year Stürmer warranty for this item when you register online.

Data sheets
Sicherheits- und Warnhinweise
Safety and warning notices

Device data
Pulse rate	0.5 - 999 Hz
Ignition	High frequency
Torch cooling	gas / water

Dimensions and weights
Length approx.	580 mm
Width/depth approx.	190 mm
Height approx.	350 mm
Weight approx.	14.5 kg

Duty cycle
at Imax. 40°C TIG DC	60 %
at Imax. 40°C electrode	35 %
Current at 100% DC 40°C TIG DC	155 A
Current at 100% DC 40°C electrode	120 A

Electrical Data
Current consumption TIG AC	19.2 A
Input current TIG DC	20.5 A
Input current electrode AC	27.5 A
Current consumption electrode DC	30 A
Supply voltage	90 – 275 V
Mains frequency	50/60 Hz

Electrode
Weldable electrodes	1.6 – 4.0 mm

Input
TIG DC	4.7 kVA
Electrode	6.9 kVA

Setting range
TIG DC	3 – 200 A
Electrode	10 – 200 A

Standards and certifications
Standard	EN 60974-1:2012/EN 60974-10:2014
EMC class	A
Explanation EMC class	This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.

VPE

Unit: pc(s).
Packaging unit: 1

Gas hose 4 m with quick connector
Torch TIG SR18 4 m (water cooled)
Welding helmet VarioProtect XXL W
3 m ground cable 16 mm² with ground clamp
Pressure reducer
Water cooling unit
Trolley
TIG welding glove Basic size L/Gr. 9

Power factor correction	✔
Process TIG pulsing	✔

Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de

If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.