| Bending performances profile type optional | |
|---|---|
| Square tube dimensions [1] | 25 x 2 mm |
| Square tube min. bending Ø [1] | 450 mm |
| Square tube heavy axis dimensions bending Ø [1] | 30 x 15 x 2.5 mm |
| Square tube heavy axis min. bending Ø [1] | 500 mm |
| Round tube dimensions [1] | 25.4 x 2.3 mm |
| Round tube min. bending Ø [1] | 300 mm |
| Round profile dimensions [1] | 22 mm |
| Round profile min. bending Ø [1] | 200 mm |
| isosceles angle profile outside dimensions [1] | 35 x 35 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 400 mm |
| isosceles angle profile inside dimensions [1] | 30 x 30 x 4 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 550 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
Ring bending machine
PRM 40 FH
Can be used horizontally and vertically for profiles and tubes with foot control
12.750,00
EUR excl. Tax / pc(s).
15.172,50 EUR incl. 19% Tax / pc(s).
15.172,50 EUR incl. 19% Tax / pc(s).
Promotional price *
11.799,00 EUR excl. Tax / pc(s).14.040,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.
Art.-No. 3812040
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Heavy cast construction
- hardened bending rolls
- Shafts made of special steel, hardened and ground
- Lateral straightening rollers, infinitely adjustable
- All 3 rollers driven by gear
- Horizontal and vertical working position
- Suitable for very small bending diameters
- Suitable for very small bending diameters due to orbital deliverable lower rollers
- mobile control panel with two digital displays for the feed rollers
- Straightening rolls are suitable for bending angle iron as standard
special accessories
- Tube bending rolls
- Angle bending rolls
- Special straightening rollers
- Profile bending rolls
- Plastic rollers for soft materials
- Device for twisting rods
- Spiral bending tool
| Bending performances profile type standard | |
|---|---|
| Square material dimensions [1] | 18 mm |
| Square material min. bending Ø [1] | 250 mm |
| Flat material light axis dimensions bending Ø [1] | 50 x 12 mm |
| Flat material light axis min. bending Ø [1] | 400 mm |
| Flat material heavy axis dimensions bending Ø [1] | 35 x 8 mm |
| Flat material heavy axis min. bending Ø [1] | 300 mm |
| UPN profile top rib dimensions [1] | 35 x 5 mm |
| T profile top rib min. bending Ø [1] | 400 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 30 x 5 mm |
| T profile outside rib min. bending Ø [1] | 300 mm |
| UPN profile inside rib dimensions [1] | 35 x 5 mm |
| T profile inside rib min. bending Ø [1] | 300 mm |
| UPN profile outside leg dimensions [1] | UPN 40x20 mm |
| UPN profile outside leg min. bending Ø [1] | 350 mm |
| UPN profile outside leg dimensions [2] | UPN 35 x 18 |
| UPN profile outside leg min. bending Ø [2] | 500 mm |
| UPN profile inside leg dimensions [1] | U30x15 mm |
| UPN profile inside leg min. bending Ø [1] | 500 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Dimensions and weights | |
|---|---|
| Length approx. | 1050 mm |
| Width/depth approx. | 500 mm |
| Height approx. | 1250 mm |
| Weight approx. | 350 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 1,1 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Shaft diameter top | 35 mm |
| Shaft diameter bottom | 35 mm |
| Roller diameter top | 137 mm |
| Roller diameter bottom | 137 mm |
| Speed | 7 m/min |
| VPE | 1 |
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Standard bending rolls
- Digital displays for feed rollers
- mobile control panel
- straightening rollers
- substructure
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
