| Cooling lubricant system | |
|---|---|
| Coolant pump output | 0,1 kW |
Precision guide and drawbar turning machine
OPTIturn TX 6222V
With electronically controllable drive and digital position indicator DPA 32
36.670,00
EUR excl. Tax / pc(s).
43.637,30 EUR incl. 19% Tax / pc(s).
43.637,30 EUR incl. 19% Tax / pc(s).
Promotional price *
35.799,00 EUR excl. Tax / pc(s).42.600,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.
Art.-No. 3432467
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing due to heavily ribbed 25GG casting
- Precisely machined slide
- Shafts on needle bearings, all components are lubricated in an oil bath
- Bed guides hardened and precision ground
- All electronic controls can be reached centrally
- All gear wheels of the feed gear made of hardened steel
- Handwheels decoupled and tested in accordance with EN 23125
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Complete lead and pull spindle cover
- Complete illumination of the work area
- Service-friendly removable rear panel
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Energy chain for gentle cable and hose guidance
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- No change wheels necessary
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Electronic feed switch-off of the Z-axis
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- Electric position switch-off with quadruple position stop
- Three-jaw lathe chuck included as standard
- Quick-change steel holder SWH 7-C
- Steel holder 32 x 130 type D for square chisel 25 mm
- Large spindle bore
| Dimensions and weights | |
|---|---|
| Length approx. | 3605 mm |
| Width/depth approx. | 1739 mm |
| Height approx. | 1905 mm |
| Weight approx. | 2800 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 11 kW |
| Total rated value | 12 kW |
| Drive power | 0.55 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Leading spindle | 6 mm |
| Speed range | |
|---|---|
| Number of gears | 2 x 3 Steps |
| Speed range | 14 – 1800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 105 mm |
| Tool holder | SWH 7-C |
| Spindle cone | MT 7 |
| Tailstock | |
|---|---|
| Chuck | MK 5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel | |
|---|---|
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 2000 mm |
| Work areas | |
|---|---|
| Center height | 310 mm |
| Distance between center | 2225 mm |
| Swing diameter above machine bed | 620 mm |
| Swing diameter in bed bridge | 880 mm |
| Swing diameter above longitudinal slide | 580 mm |
| Swing diameter above planing slide | 424 mm |
| Turning length in bed bridge | 231 mm |
| VPE | 1 |
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 315 mm no. 8
- Non-moving centre point MK 5 long
- Non-moving centre point MK 5 short
- Quick-change steel holder SWH 7-C
- Steel holder for square chiselel 32 x 130 type D for square chisel 25 mm
- Initial machine filling with quality oil
- Reducing sleeve MK 7 / MK 5
- Operating tool
| Digital position indicator | DPA 32 |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
