• Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
  • Productimage for MTBS 3130-30 T
Brandimage to Product MTBS 3130-30 T

Motorized sheet metal shears

MTBS 3130-30 T

With NC-controlled backgauge, front and rear ejection and manual gap adjustment

47.500,00 EUR excl. Tax / pc(s).
56.525,00 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 3815630

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Pneumatic sheet support, sheet ejection to the front or rear controllable via toggle switch
    • Backgauge 750 mm guided on round shafts and driven via ball screw
    • Stainless steel table supports with transfer balls for comfortable material handling
    • Positioning control of the backgauge Maper HT071 with digital dimension display
    • Heavy and robust steel construction in welded design
    • Constant, low cutting angle for optimum cutting results
    • Side fence 1000 mm with scale and T-slot
    • Two material support arms 500 mm with T-slot
    • Balls in the support table for easier material transport
    • Cutting gap adjustment by means of vernier rings
    • High quality blade suitable for stainless steel
    • LED illumination of the cutting area
    • Continuous finger protection device
    • Mobile foot pedal with emergency stop switch
    • All moving parts with low-maintenance bearings
    • Electrical system from Siemens and Schneider

     

    • Thin sheets are supported in order to be able to apply dimensionally to the backgauge
    • pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
    • Operator can choose if the section falls into the back room or the operator side

     

    Working width3050 mm
    Cutting performance material tensile strength 400 N/mm²3 mm
    Cutting performance material tensile strength 450 N/mm²3 mm
    Cutting performance material tensile strength 700 N/mm²1.5 mm
    Number of sheet support arms3 St
    Rear stop adjustment range up to750 mm
    Rear stop speed28 mm/s
    Side stop length1000 mm
    Motor output rear stop0.37 kW
    Cutting angle1,5 °
    Max. strokes for full cutting length38 /min
    Cutting kerf adjustment min.0.05 mm
    Cutting kerf adjustment max.0.4 mm
    VPE1
    Dimensions and weights
    Table length3309 mm
    Table depth530 mm
    Table height860 mm
    Machine body depth870 mm
    Length approx.3910 mm
    Width/depth approx.2360 mm
    Height approx.1280 mm
    Weight approx.3660 kg
    Electrical Data
    Absorbed power drive motor8.45 kW
    Total rated value9 kW
    Supply voltage400 V
    Mains frequency50 Hz
    Unit: pc(s).
    Packaging unit: 1

     

     

     

    Table support made of stainless steel
    Star-delta start-up

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.

    Optional parts

    Optional parts can not be retrofitted and are available only when ordering new machines.