OPTIturn TH 4010

Fully equipped. Convincing in precision and performance

9.790,00 EUR excl. Tax / pc(s).
11.650,10 EUR incl. 19% Tax / pc(s).

Promotional price *

9.299,00 EUR excl. Tax / pc(s).
11.065,81 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 31.08.2024 in Germany.

Art.-No. 3402070

Are you interested in this product?

Put a request

Find Trader

Productdetails

Hardened and ground Z-axis guideway
Precisely machined slide
Guaranteed concentricity of the spindle nose better than 0.015 mm
Spindle holder Camlock DIN ISO 702-2 No. 5
DC 24 volt electrics
All guides can be adjusted using wedge strips
Right/left rotation switchable on the bed slide
Two-channel safety electronics
Switch with life cycle calculation, tested in accordance with EN ISO 13849
Smooth-running gear wheels, hardened and ground
Main spindle runs in an oil bath
Quick, easy and tool-free adjustment using clamping lever
Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
Handwheels with adjustable fine scaling 0.04 / 0.02 mm
Safety handwheels with push-out function in the X- and Z-axis
Adjustment range top slide ± 90
Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
Pull-out chip tray with guide rails
Lockable main switch
Emergency stop device with foot actuation
Machine base with three panels (no compartments)
Coolant device
LED machine lamp in the chip guard

TH 4010 / TH 4010D / TH 4010D:

Motor protection switch

TH 4010V:

Speed display
Speed monitoring in accordance with the Machinery Directive
Two gear stages
Quick-change steel holder 3-E
Steel holder 20 x 100 type D for square chisels

Dimensions and weights
Length approx.	1920 mm
Width/depth approx.	740 mm
Height approx.	1222 mm
Weight approx.	735 kg

Electrical Data
Drive motor output	1,5 kW
Supply voltage	400 V
Mains frequency	50 Hz

Feed
Longitudinal feed range	0,043 – 0,653 mm/rev
Number of longitudinal feeds	48
Flat feed range	0,015 – 0,206 mm/rev
Number of flat feeds	48

Pitches
Metric pitch	0,4 – 7 mm/rev
Number of metric pitches	42
Imperial pitch	70 – 4 Gg/1"
Number of imperial pitches	42

Speed range
Number of gears	16
Speed range	45 – 1800 min¯¹

Spindle
Spindle chuck	Camlock DIN ISO 702-2 No. 5
Spindle bore/rod passage diameter	52 mm
Tool holder max. chuck height	20 mm
Spindle cone	MT 6

Tailstock
Chuck	MK 3
Quill stroke	130 mm
Quill diameter	45 mm

Tool clamping
Tool holder chuck size	16 mm

Travel
Travel upper slide	100 mm
Travel cross slide	195 mm
Travel carriage saddle	750 mm

Work areas
Max. height	205 mm
Max. width	1000 mm
Swing diameter above machine bed	410 mm
Swing diameter above planing slide	255 mm
Bed width	206 mm

VPE

Unit: pc(s).
Packaging unit: 1

Fixed bezel passage Ø 5 - 85 mm
Running bezel passage Ø 5 - 65 mm
LED machine light
Reduction sleeve MK 6 / MK 3
Fixed centering points MK 3
Fixed centering point MK 3, alloyed
Change gear set
Initial machine filling with quality oil
operating tool

TH 4010 / TH 4010D

Quadruple steel holder 16 mm

TH 4010V

Quick-change steel holder 3-E
Steel holder 20 x 100 type D for square chisels

Do not forget the lathe chuck!

If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.