| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Mechanics lathe
OPTIturn TH 4010V
Fully equipped. Impressive precision and performance - with DPA 31 Plus digital position indicator and Siemens inverter Vario drive
17.390,00
EUR excl. Tax / pc(s).
20.694,10 EUR incl. 19% Tax / pc(s).
20.694,10 EUR incl. 19% Tax / pc(s).
Promotional price *
15.999,00 EUR excl. Tax / pc(s).19.038,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.
Art.-No. 3402085
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Hardened and ground Z-axis guideway
- Precisely machined slide
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 5
- DC 24 volt electrics
- All guides can be adjusted using wedge strips
- Right/left rotation switchable on the bed slide
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Smooth-running gear wheels, hardened and ground
- Main spindle runs in an oil bath
- Quick, easy and tool-free adjustment using clamping lever
- Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with push-out function in the X- and Z-axis
- Adjustment range top slide ± 90
- Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
- Pull-out chip tray with guide rails
- Lockable main switch
- Emergency stop device with foot actuation
- Machine base with three panels (no compartments)
- Coolant device
- LED machine lamp in the chip guard
TH 4010 / TH 4010D / TH 4010D:
- Motor protection switch
TH 4010V:
- Speed display
- Speed monitoring in accordance with the Machinery Directive
- Two gear stages
- Quick-change steel holder 3-E
- Steel holder 20 x 100 type D for square chisels
You will receive the 3-year Stürmer warranty for this item when you register online.
| Dimensions and weights | |
|---|---|
| Length approx. | 1920 mm |
| Width/depth approx. | 740 mm |
| Height approx. | 1555 mm |
| Weight approx. | 780 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 4,0 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,043 – 0,653 mm/rev |
| Number of longitudinal feeds | 48 |
| Flat feed range | 0,015 – 0,206 mm/rev |
| Number of flat feeds | 48 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 7 mm/rev |
| Number of metric pitches | 42 |
| Imperial pitch | 70 – 4 Gg/1" |
| Number of imperial pitches | 42 |
| Product information EU 2023/2854 | |
|---|---|
| Type of the generated data | Usage data |
| Format of the generated data | Common, machine-readable formats such as JSON |
| Amount of data | Up to 5 MB |
| Continuous data generation in real time | Yes |
| Data storage location | On the device |
| Data access | Via physical interfaces |
| Further information | In the operating instructions or at info@stuermer-maschinen.de |
| Speed range | |
|---|---|
| Number of gears | 2 |
| Speed range | 30 – 3000 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Tool holder max. chuck height | 16 mm |
| Spindle cone | MT 6 |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C3 |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 130 mm |
| Quill diameter | 45 mm |
| Travel | |
|---|---|
| Travel upper slide | 100 mm |
| Travel cross slide | 195 mm |
| Travel carriage saddle | 750 mm |
| Work areas | |
|---|---|
| Center height | 205 mm |
| Distance between center | 1000 mm |
| Swing diameter above machine bed | 410 mm |
| Swing diameter above planing slide | 255 mm |
| Bed width | 206 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Fixed bezel passage Ø 5 - 85 mm
- Running bezel passage Ø 5 - 65 mm
- LED machine light
- Reduction sleeve MK 6 / MK 3
- Fixed centering points MK 3
- Fixed centering point MK 3, alloyed
- Change gear set
- Initial machine filling with quality oil
- operating tool
TH 4010 / TH 4010D
- Quadruple steel holder 16 mm
TH 4010V
- Quick-change steel holder 3-E
- Steel holder 20 x 100 type D for square chisels
Do not forget the lathe chuck!
| Digital position indicator | DPA 31 Plus |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
