| Explanation technical data | Data in brackets for 110 volt models |
| VPE | 1 |
Plasma Cutting Machine
BARRACUDA 45i with torch S65
Efficient and powerful
1.579,00
EUR excl. Tax / pc(s).
1.879,01
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 1301045
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Mobility, maximum economic efficiency and first-class cutting quality are the special features of the REHM plasma cutting systems.
- The new compact BARRACUDA® is available in two sizes and four performance classes
- Large dimensioned performance components and 100 percent tested quality guarantee the reliability of the BARRACUDA®.
Universally applicable
- For unalloyed and high-alloyed steels, aluminum, copper, brass, bronze, nickel, non-ferrous metals and all other electrically conductive metals, also with painted surfaces
- Optimum cutting quality and cut quality
- Through precisely controlled, infinitely adjustable cutting current
- Through optimized plasma cutting torches
- With high power reserves - even at the critical end of the cut
Economical
- Immediate start of cutting, the material can be cut without prior heating
- High cutting speed combined with long tool life and best cutting quality
- No technical gas required, only compressed air
Mobile
- Suitable for use on generator
- Compact design
- Optimally portable on sturdy handle and a light weight
BARRACUDA® 45i with POWER FACTOR CONTROLLER (PFC)
- Compliance with the new regulation EU 2019/1784
- Highest energy efficiency
- Worldwide use
- Clean mains power consumption
- Can be used anywhere
BARRACUDA® 45i with Eurocentral connection
BARRACUDA® 65i/105i/125i Connection of plasma torches via TRAFIMECTOR®: With 140 mm projection, one of the most compact connections on the market. Allows torch to be changed without tools.
- No tools required
- Can be operated with one hand
- The connection is designed for 160A
- TRAFIMECTOR® is connected with maximum operator safety
| Cutting performance | |
|---|---|
| Quality cutting steel (ST37) max. | 10 mm |
| Separating cut steel (ST37) max. | 15 mm |
| Quality cutting stainless steel max. | 16 mm |
| Separating cut stainless steel max. | 18 mm |
| Quality cutting aluminium max. | 10 mm |
| Separating cut aluminium max. | 15 mm |
| Device data | |
|---|---|
| Air consumption | 120 l/min |
| Pressure | 5 bar |
| Dimensions and weights | |
|---|---|
| Length approx. | 490 mm |
| Width/depth approx. | 150 mm |
| Height approx. | 290 mm |
| Weight approx. | 8.1 kg |
| Duty cycle | |
|---|---|
| Duty cycle plasma | 50 (35) % |
| Current at 100% DC 40°C Plasma | 30 (20) A |
| Electrical connections | |
|---|---|
| Input current | 20 (31.8) A |
| Electrical Data | |
|---|---|
| Supply voltage | 230 (110) V |
| Mains frequency | 50/60 Hz |
| Setting range | |
|---|---|
| Adjusting range plasma approx. | 20 (20) – 40 (30) A |
| Standards and certifications | |
|---|---|
| Standard | EN 60974-1:2012, EN 60974-10:2014 |
| EMC class | A |
| Explanation EMC class | This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. |
| Marking | CE |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Plasma torch S65 6m
- Ground cable 6mm² 4m with 300A ground clamp
| LC display | 2,8 " |
| PFC operation | ✔ |
| Pilot ARC control | ✔ |
| 2-stroke function | ✔ |
| 4-stroke function | ✔ |
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
