| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Lathe
OPTIturn TX 4414
Center lathe meets the highest requirements in technical equipment and precision. With digital position display DPA 32
16.950,00
EUR excl. Tax / pc(s).
20.170,50
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3432422
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing due to heavily ribbed 25GG casting
- Precisely machined slide
- Shafts on needle bearings, all components are lubricated in an oil bath
- Bed guides hardened and precision ground
- All electronic controls can be reached centrally
- All gear wheels of the feed gear made of hardened steel
- Handwheels decoupled and tested in accordance with EN 23125
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
- Complete lead and pull spindle cover
- Complete illumination of the work area
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Energy chain for gentle cable and hose guidance
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- No change wheels necessary
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Electronically braked motor
- Electronic feed cut-off of the Z-axis
- Electric position cut-off with quadruple position stop
- Three-jaw lathe chuck included in the scope of delivery
- SWH 5-B quick-change steel holder included in the scope of delivery
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 2410 mm |
| Width/depth approx. | 1085 mm |
| Height approx. | 1825 mm |
| Weight approx. | 2030 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 5.5 kW |
| Total rated value | 6.1 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 0,752 mm/rev |
| Number of longitudinal feeds | 44 |
| Flat feed range | 0,025 – 0,376 mm/rev |
| Number of flat feeds | 44 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 – 7,5 mm/rev |
| Number of metric pitches | 44 |
| Imperial pitch | 60 – 4 Gg/Zoll |
| Number of imperial pitches | 44 |
| Diametrical pitch | 0,25 - 3,75 mm x π |
| Number of diametrical pitches | 44 |
| Modular thread pitch | 120 – 8 Gg/π |
| Number of modular thread pitches | 44 |
| Speed range | |
|---|---|
| Number of gears | 12 Steps |
| Speed range | 40 – 2200 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 6 |
| Spindle bore/rod passage diameter | 52 mm |
| Tool holder | SWH 5-B |
| Spindle cone | MT 6 |
| Tailstock | |
|---|---|
| Chuck | MT 4 |
| Quill stroke | 180 mm |
| Quill diameter | 58 mm |
| Travel | |
|---|---|
| Travel upper slide | 153 mm |
| Travel cross slide | 290 mm |
| Travel carriage saddle | 950 mm |
| Work areas | |
|---|---|
| Max. height | 220 mm |
| Max. width | 1280 mm |
| Swing diameter above machine bed | 440 mm |
| Swing diameter above planing slide | 250 mm |
| Bed width | 300 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 200 mm Camlock No. 6
- Two non-running centers MK3 and MK5
- Adapter MK6-MK5
- Quick change steel holder SWH 5-B
- Machine initial filling with quality oil
- Operating tool
| Digital position indicator | DPA 32 |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
