| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Multiple combination
minimax cu 300c F 26 N TERSA
Precise and reliable in use. With rigid milling spindle, aluminum sliding carriage and TERSA knife shaft.
13.190,00
EUR excl. Tax / pc(s).
15.696,10
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 5500310
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Sturdy cast steel construction
- High-precision sliding table made of anodized aluminum with 2250 mm travel
- Maximum saw blade diameter of 315 mm possible, saw blade can be swiveled up to 45 °< / li>
- Large trimming frame (960 x 600 mm) with an extendable aluminum telescopic stop up to 2660 mm
- Heavily ribbed dressing work tables made of gray cast iron, afterglow and tension-free for decades of stability and flatness < li>Helical toothed steel feed roller for even material feed
- Three milling speeds, manually adjustable
- Milling spindle with right-left rotation
- Three independent industrial motors
- With lockable Main switch, motor protection switch, emergency stop switch
| Circular saw unit | |
|---|---|
| Trimming length | 2600 mm |
| Cutting width with rip fence | 820 mm |
| Max. cross-cutting width left of saw blade | 2660 mm |
| Saw blade angle | 90 – 45 ° |
| Max. cutting height at 90° | 102 mm |
| Max. cutting height at 45° | 79 mm |
| Max. saw blade protrusion 90° | 100 mm |
| Max. saw blade protrusion 45° | 78 mm |
| Diameter of (main) saw blade | 315 mm |
| Explanation about diameter of (main) saw blade | with scorer |
| (Main) saw blade speed | 4000 min¯¹ |
| Dimensions and weights | |
|---|---|
| Weight approx. | 525 kg |
| Electrical Data | |
|---|---|
| Number of drives | 3 |
| Drive motor output | 5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Extraction port | |
|---|---|
| Saw blade protection extraction port diameter | 60 mm |
| Number of extraction ports | 4 |
| Extraction port diameter | 120 mm |
| Feed | |
|---|---|
| Speed | 7 m/min |
| Installation information | |
|---|---|
| Space requirement length | 5793 mm |
| Space requirement width/depth | 4002 mm |
| Space requirement explanation | The dimensions take into account maximum travel distances or useful lengths. |
| Work area length | 1600 mm |
| Work area width/depth | 1600 mm |
| Explanation about work area | Please add the given dimensions with the required space to obtain the free space recommended for the machine. |
| Jointing | |
|---|---|
| Infeed table width | 300 mm |
| Infeed table length | 1510 mm |
| Max. cutting depth | 4 mm |
| Milling cutter diameter max. | |
|---|---|
| not lowerable | 210 mm |
| lowerable | 180 mm |
| Pin milling | 275 mm |
| Milling spindle | |
|---|---|
| Angle | 0 ° |
| Mandrel diameter | 30 mm |
| Usable length | 100 mm |
| Speed(s) | 3500/7000/10000 min¯¹ |
| Planing knife shaft | |
|---|---|
| Type | TERSA |
| Diameter | 72 mm |
| Number of planing blades | 3 St |
| Speed | 5200 min¯¹ |
| Sliding carriage and table | |
|---|---|
| Sliding table length | 2660 mm |
| Sliding table width | 270 mm |
| Sliding table height | 124 mm |
| Table length | 1115 mm |
| Table width | 335 mm |
| Table height | 900 mm |
| Thickness | |
|---|---|
| Table length | 585 mm |
| Table width | 300 mm |
| Working height min. | 3 mm |
| Working height max. | 230 mm |
| Max. cutting depth | 4 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Combination dressing/parallel fence
- Bogenfrässchutzhaube
- Tersa-knife shaft
- Anodized aluminum sliding carriage
- Safety reversible stop jaws made of aluminum
- Folding stops
| Scoring unit | optionally available |
| Sliding carriage | made of anodised aluminium |
| Trimming frame | with angle-adjustable telescopic crosscut fence with two professional folding fences |
| Eccentric clamp | ✔ |
| Strokes | Combination dressing/parallel fence |
| Curved milling protection hood | ✔ |
| Milling stop | Safety reversible fence jaws made of aluminium |
| Height adjustment and tilting of the saw unit | manual |
| Height adjustment and swivelling of the milling unit | manual |
| Swivel arm for feed apparatus | optionally available |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
Accessories
Optional parts
Optional parts can not be retrofitted and are available only when ordering new machines.
