| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Multiple combination
minimax cu 410e F 27 TERSA
With TERSA knife shaft, tiltable milling spindle and format sliding carriage. Ideal for company carpentry, workshops and small businesses.
22.200,00
EUR excl. Tax / pc(s).
26.418,00
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 5500550
Are you interested in this product?
Put a request
Find Trader
Productdetails
- For sawing, milling, surface/thickness planing and optional slotted hole drilling in confined spaces
- High precisionziser format sliding carriage made of anodised aluminium, various lengths
- Large extension arm (1200 x 650 mm) with material roll and extendable aluminium telescopic stop up to max. 3200 mm with professional stop flaps
- Max. Saw blade Ø 315 mm, tiltable from 90° to -45°
- Large tilting range of the milling spindle from 90° to -45° backwards
- Four milling speeds up to 10000 min⁻¹ manually adjustable
- With right-left rotation of the milling spindle
- Heavily ribbed dressing work tables made of stress-free grey cast iron for decades of stabilityt and flatness
- 2-stage feed for thickness planing
- Three independent industrial motors for continuous operation
- With lockablebare main switch, motor protection switch
- Standard with separate saw parallel fence and separate jointing fence for dressing
- Fixed handwheels
| Circular saw unit | |
|---|---|
| Trimming length | 2600 mm |
| Cutting width with rip fence | 900 mm |
| Max. cross-cutting width left of saw blade | 3260 mm |
| Saw blade angle | 90 45 ° |
| Max. cutting height at 90° | 90 mm |
| Max. cutting height at 45° | 63 mm |
| Max. saw blade protrusion 90° | 100 mm |
| Max. saw blade protrusion 45° | 71 mm |
| Diameter of (main) saw blade | 315 mm |
| Explanation about diameter of (main) saw blade | with scorer |
| (Main) saw blade speed | 4000 min¯¹ |
| Dimensions and weights | |
|---|---|
| Weight approx. | 857 kg |
| Electrical Data | |
|---|---|
| Number of drives | 3 |
| Drive motor output | 5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Extraction port | |
|---|---|
| Saw blade protection extraction port diameter | 60 mm |
| Number of extraction ports | 3 |
| Extraction port diameter | 120 mm |
| Feed | |
|---|---|
| Speed from to | 6 – 12 m/min |
| Installation information | |
|---|---|
| Space requirement length | 5960 mm |
| Space requirement width/depth | 5140 mm |
| Space requirement explanation | The dimensions take into account maximum travel distances or useful lengths. |
| Work area length | 1600 mm |
| Work area width/depth | 1600 mm |
| Explanation about work area | Please add the given dimensions with the required space to obtain the free space recommended for the machine. |
| Jointing | |
|---|---|
| Infeed table width | 410 mm |
| Infeed table length | 2000 mm |
| Max. cutting depth | 5 mm |
| Milling cutter diameter max. | |
|---|---|
| lowerable | 210 mm |
| lowerable 45° | 150 mm |
| Pin milling | 275 mm |
| Milling spindle | |
|---|---|
| Angle from to | 0 – -45 ° |
| Mandrel diameter | 30 mm |
| Usable length | 125 mm |
| Speed(s) | 3500/6000/8000/10000 min¯¹ |
| Planing knife shaft | |
|---|---|
| Type | TERSA |
| Diameter | 87 mm |
| Number of planing blades | 4 St |
| Speed | 5200 min¯¹ |
| Sliding carriage and table | |
|---|---|
| Sliding table length | 2660 mm |
| Sliding table width | 360 mm |
| Sliding table height | 142 mm |
| Table length | 1250 mm |
| Table width | 430 mm |
| Table height | 900 mm |
| Thickness | |
|---|---|
| Table length | 757 mm |
| Table width | 423 mm |
| Working height min. | 3 mm |
| Working height max. | 230 mm |
| Max. cutting depth | 5 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Separate saw-rip fence
- Separate dressing joining stop
- Bogenfrässchutzhaube
- 4-knife Tersa cutterblock
- Anodised aluminum sliding carriage
- Aluminum stop jaws
- folding stops
- Roll of material on the boom
- Degree grid division at the stop
- Milling stop with quick positioning
- edging shoe
- Eccentric
- Handle for sliding carriage
- Round rod guide on the saw stop
| Scoring unit | optionally available |
| Sliding carriage | made of anodised aluminium |
| Handle for sliding carriage | ✔ |
| Trimming frame | ✔ |
| Material roll on the trimming frame | ✔ |
| Trimming shoe | ✔ |
| Eccentric clamp | ✔ |
| Mitre fence | with degree graduation and two professional folding stops |
| Saw parallel stop | ✔, with stable round rod guide |
| Dressing join fence | ✔ |
| Curved milling protection hood | ✔ |
| Milling stop | with aluminium jaws and quick positioning |
| Height adjustment and tilting of the saw unit | manual |
| Height adjustment and swivelling of the milling unit | manual |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
Accessories
Optional parts
Optional parts can not be retrofitted and are available only when ordering new machines.
