| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Drehmaschine
TM 3610V
The lead screw and feed screw lathes impress with their sturdy design and easy handling
12.060,00
EUR excl. Tax / pc(s).
14.351,40
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3403038
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Guaranteed concentricity of the spindle nose ≤ 0.015 mm
- Hardened and ground Z-axis guideway
- DC 24 volt electrics
- All gear wheels of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
- Safety handwheels with disengagement function in the X and Z axes
- LED machine lamp in the chip guard
- Motor electrically braked
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Switch with life cycle calculation tested in accordance with EN ISO 13849
- Lead and feed screw cover
- Inductive position measuring system on the Z-axis
- Magnetic tape system on the x- and Z0-axis
| Dimensions and weights | |
|---|---|
| Length approx. | 1964 mm |
| Width/depth approx. | 869 mm |
| Height approx. | 1475 mm |
| Weight approx. | 608 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 3 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Flat feed range | 0.052 – 1.392 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0.4 – 7 mm/rev |
| Number of metric pitches | 26 |
| Speed range | |
|---|---|
| Number of gears | 4 Steps |
| Speed range | 40 – 3000 min¯¹ |
| Speed control | Electronical |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Travel | |
|---|---|
| Travel upper slide | 100 mm |
| Travel cross slide | 170 mm |
| Work areas | |
|---|---|
| Max. height | 180 mm |
| Max. width | 1000 mm |
| Swing diameter above machine bed | 360 mm |
| Swing diameter above planing slide | 225 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 200 mm Camlock no. 5
- Fixed steady rest Ø 7 - Ø 102 mm
- Rotating steady rest Ø 10 - Ø 60 mm
- LED machine light
- Adapter MK 6-MK 4
- Non-rotating center point MK4
- Quick-change steel holder SWH 3-E
- Steel holder 20 x 100 type D for square chisel 18 mm
- Initial machine filling with quality oil
- Operating tool
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
