| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Saw-mill combination
minimax st 4e F 23
In professional design with swiveling saw blade, swiveling milling spindle and format sliding carriage
14.150,00
EUR excl. Tax / pc(s).
16.838,50
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 5501068
Are you interested in this product?
Put a request
Find Trader
Productdetails
- High-precision format sliding carriage made of anodised aluminium
- Large trimming frame (1200 x 650 mm) with material roller and aluminium telescopic fence extendable up to max. 3200 mm
- Stable sawing unit and large dimensioned double cradle trimming unit guarantee highest stability, precision, smooth running and long service life
- Max. saw blade Saw blade Ø 315 mm tiltable from 90° to -45
- Cast iron double cradle saw unit for precise cuts: extremely robust and torsion-resistant, unit close to the saw blade and mounted on both sides, height adjustment via dovetail guide
- Saw parallel fence with fine adjustment
- Large swivelling range of the milling spindle up to -45° to the rear
- Four milling speeds, manually adjustable
- Milling spindle with right-left rotation
- Fixed handwheels with numerical displays
- Solid and precise cast iron machine table, annealed and stress relieved
- Two powerful industrial motors with motor protection switch designed for continuous use
- With lockable main switch and emergency stop switch
| Circular saw unit | |
|---|---|
| Trimming length | 2310 mm |
| Cutting width with rip fence | 900 mm |
| Max. Cutting width to the left of the saw blade | 3260 mm |
| Saw blade tilt | 90 – 45 ° |
| Max. cutting height 90° | 90 mm |
| Max. cutting height 45° | 63 mm |
| Max. Saw blade projection 90 | 100 mm |
| Max. Saw blade projection 45 | 71 mm |
| Diameter (main) saw blade | 315 mm |
| Explanation Diameter (main) saw blade | with scorer |
| Diameter scoring saw blade | 100 mm |
| Speed (main) saw blade | 4000 min¯¹ |
| Dimensions and weights | |
|---|---|
| Weight approx. | 569 kg |
| Electrical Data | |
|---|---|
| Number of drives | 2 |
| Power drive motor | 5.0 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Extraction port | |
|---|---|
| Number of suction nozzles | 2 |
| Suction nozzle diameter | 120 mm |
| Suction port diameter Saw blade guard | 60 mm |
| Milling cutter diameter max. | |
|---|---|
| lowerable | 240 mm |
| Pin milling | 275 mm |
| Milling spindle | |
|---|---|
| Spindle inclination | 0 – -45 ° |
| Useful length of the spindle | 125 mm |
| Spindle speeds | 3500/6000/8000/10000 min¯¹ |
| Sliding carriage and table | |
|---|---|
| Sliding table width | 360 mm |
| Format sliding carriage height | 142 mm |
| Table length | 1250 mm |
| Table width | 430 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Saw rip fence with round bar guide
- Bogenfrässchutzhaube
- Anodized aluminum sliding carriage
- Aluminum stop jaws
- folding stops
- Roll of material on the boom
- Adjustments with graduated grid division at the stop
- edging shoe
- Milling stop with quick positioning
- Eccentric
- Handle for sliding carriage
- Right-left rotation of the router
- Inclined milling unit 90 ° / 45 °
- Predefined. Gehrungsschnittvorrichtung
- 2 three-phase motors 5kW
| Anodised aluminium sliding sizing carriage | ✔ |
| Handle for sliding carriage | ✔ |
| Trimming frame | 1200 x 650 mm, with angle-adjustable telescopic cross-cut fence with two professional folding fences, with degree graduation |
| Material roll on the trimming frame | ✔ |
| Saw parallel stop | with round rod guide |
| Trimming shoe | ✔ |
| Eccentric clamp | ✔ |
| Control of saw blade height, tilting and rip fence | manual |
| Table extension | ✔ |
| Table lengthening | ✔ |
| Milling stop | with quick positioning |
| Curved milling protective hood | ✔ |
| Height adjustment of the spindle | manual |
| Inclination adjustment of the spindle | manual |
| Height adjustment of the saw blade | manual |
| Tilting adjustment of the saw blade | manual |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
Accessories
Optional parts
Optional parts can not be retrofitted and are available only when ordering new machines.
