- Hardened and ground Z-axis guideway
- Precisely machined slide
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 5
- DC 24 volt electrics
- All guides can be adjusted using wedge strips
- Right/left rotation switchable on the bed slide
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Smooth-running gear wheels, hardened and ground
- Main spindle runs in an oil bath
- Quick, easy and tool-free adjustment using clamping lever
- Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with push-out function in the X- and Z-axis
- Adjustment range top slide ± 90
- Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
- Pull-out chip tray with guide rails
- Lockable main switch
- Emergency stop device with foot actuation
- Machine base with three panels (no compartments)
- Coolant device
- LED machine lamp in the chip guard
TH 4010 / TH 4010D / TH 4010D:
TH 4010V:
- Speed display
- Speed monitoring in accordance with the Machinery Directive
- Two gear stages
- Quick-change steel holder 3-E
- Steel holder 20 x 100 type D for square chisels
Dimensions and weights |
---|
Length approx. | 1920 mm |
Width/depth approx. | 740 mm |
Height approx. | 1555 mm |
Weight approx. | 737 kg |
Electrical Data |
---|
Drive motor output | 2,4 kW |
Supply voltage | 400 V |
Mains frequency | 50 Hz |
Feed |
---|
Longitudinal feed range | 0,043 – 0,653 mm/rev |
Number of longitudinal feeds | 48 |
Flat feed range | 0,015 – 0,206 mm/rev |
Number of flat feeds | 48 |
Pitches |
---|
Metric pitch | 0,4 – 7 mm/rev |
Number of metric pitches | 42 |
Imperial pitch | 70 – 4 Gg/1" |
Number of imperial pitches | 42 |
Speed range |
---|
Number of gears | 16 |
Speed range | 45 – 1800 min¯¹ |
Spindle |
---|
Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
Spindle bore/rod passage diameter | 52 mm |
Tool holder max. chuck height | 16 mm |
Spindle cone | MT 6 |
Tailstock |
---|
Chuck | MK 3 |
Quill stroke | 130 mm |
Quill diameter | 45 mm |
Tool clamping |
---|
Tool holder chuck size | 16 mm |
Travel |
---|
Travel X axis | 100 mm |
Y axis | 195 mm |
Travel upper slide | 100 mm |
Travel cross slide | 195 mm |
Work areas |
---|
Max. height | 205 mm |
Max. width | 1000 mm |
Swing diameter above machine bed | 410 mm |
Swing diameter above planing slide | 255 mm |
Bed width | 206 mm |
Unit: pc(s).
Packaging unit: 1
- Fixed bezel passage Ø 5 - 85 mm
- Running bezel passage Ø 5 - 65 mm
- LED machine light
- Reduction sleeve MK 6 / MK 3
- Fixed centering points MK 3
- Fixed centering point MK 3, alloyed
- Change gear set
- Initial machine filling with quality oil
- operating tool
TH 4010 / TH 4010D
- Quadruple steel holder 16 mm
TH 4010V
- Quick-change steel holder 3-E
- Steel holder 20 x 100 type D for square chisels
Do not forget the lathe chuck!
Digital position indicator | DPA 31 Plus |