• DE
  • EN
    • DownloadsGuarantee TermsContactTerms and conditionsPrivacy StatementImprint
    1. Stürmer Maschinen
    2. Products
    3. Metalworking
    4. Lathes conventional
    5. OPTIturn TU 1503V
    Productimage for OPTIturn TU 1503V
    Brandimage to Product OPTIturn TU 1503V

    Lathe

    OPTIturn TU 1503V

    The smallest lathe with electronically adjustable speed

    955,00 EUR excl. Tax / pc(s).
    1.136,45 EUR incl. 19% Tax / pc(s).
    Promotional price *
    859,00 EUR excl. Tax / pc(s).
    1.022,21 EUR incl. 19% Tax / pc(s).

    Prices are recommended retail prices. Retailer prices may vary.
    * Promotional price valid until 31.08.2024 in Germany.

    Art.-No. 3420260

    Are you interested in this product?
  • Put a request
  • Find Trader

    • Productdetails

    • DC motor
    • Verrippt prism bed made of gray cast iron, inductively hardened and ground
    • Hardened and ground Z-axis guideway
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Concentricity - lathe chuck max 0.05 mm
    • Lead screw for thread cutting or automatic longitudinal turning
    • Longitudinal, level and upper slide
    • Automatic longitudinal / lead screw drive
    • Large threading area due to change gear set
    • 3-jaw lathe chuck in the standard scope of delivery
    • Easy and fast speed change via V-belt
    • Safety switch in the cover
    • Right / left rotation in the control panel switchable
    • Chuck protection with microswitch
    • Handwheels with adjustable fine scale 0.04 / 0.01 mm
    • All guides can be adjusted without clearance by means of wedge strips
    • Emergency stop impact switch
    • Low voltage electronics
    • EMC filter class C1

     

    Dimensions and weights
    Length approx.570 mm
    Width/depth approx.340 mm
    Height approx.300 mm
    Weight approx.23 kg
    Electrical Data
    Drive motor output0,45 kW
    Supply voltage230 V
    Mains frequency50 Hz
    Feed
    Longitudinal feed range0,05 – 0,1 mm/rev
    Number of longitudinal feeds2
    Pitches
    Metric pitch0,5 – 1,5 mm/rev
    Number of metric pitches8
    Diametrical pitch30
    Speed range
    Number of gears1
    Speed range120 – 3000 min¯¹
    Speed controlelectronically adjustable
    Spindle
    Spindle chuckcylindrical Ø 22
    Spindle bore/rod passage diameter11 mm
    Tool holder max. chuck height12 mm
    Spindle coneMT 1
    Standards and certifications
    StandardDIN EN 55011
    EMC levelC1
    Tailstock
    ChuckShortened MT 1
    Quill stroke30 mm
    Travel
    Travel upper slide40 mm
    Travel cross slide55 mm
    Travel carriage saddle270 mm
    Work areas
    Max. height75 mm
    Max. width265 mm
    Swing diameter above planing slide70 mm
    Bed width70 mm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Three-jaw lathe chuck Ø 80 mm,
      centrically exciting
    • Fixed center point MK1
    • bulkhead
    • chip pan
    • Change gear set
    • Double tool holder
    • operating tool

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.