• Productimage for OPTImill BF 16Vario
  • Productimage for OPTImill BF 16Vario
  • Productimage for OPTImill BF 16Vario
  • Productimage for OPTImill BF 16Vario
  • Productimage for OPTImill BF 16Vario
  • Productimage for OPTImill BF 16Vario
Brandimage to Product OPTImill BF 16Vario

Drilling-milling machine

OPTImill BF 16Vario

Small drilling-milling machine with electronically infinitely variable drive for the modeler

1.145,00 EUR excl. Tax / pc(s).
1.362,55 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 3338116

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Versatile application possibilities
    • Two-stage gear ratio
    • Tool holder MK 2
    • Safety electronics in 24 Volt version
    • EMC filter class C1
    • Drilling and milling head can be tilted by ± 90 ° on both sides, thus drilling and milling in angular position as required
    • Height-adjustable and large-dimensioned protective screen with microswitch
    • Accurate delivery through positionable scale rings on all handwheels
    • Simple and clear operating unit with on-off switch, potentiometer and emergency stop impact switch
    • Infinitely variable speed from 100 to 3,000 min-1
    • High concentricity measured by tapered roller bearing better than 0.015 mm in quill
    • Stable column with dovetail guide via wedge bars adjustable on all 3 axes
    • Game in the feed spindle adjustable and adjustable
    • Column laterally displaceable for extended application
    • Massive cross table with T-slots and coolant channel as well as adjustable end stops
    • Integrated longitudinal scale in the cross table
    • All travel paths can be read on scales
    • Clean milling pattern by individually clamped guides
    • Inexpensive and stable in value

     

    Dimensions and weights
    Length approx.505 mm
    Width/depth approx.465 mm
    Height approx.795 mm
    Weight approx.62 kg
    Drilling/milling output
    Max. size milling head52 mm
    Max. size shaft milling cutter20 mm
    Drilling performance steel (S235JR)16 mm
    Continuous drilling performance steel (S235JR)12 mm
    Electrical Data
    Supply voltage230 V
    Mains frequency50 Hz
    Milling table horizontal
    Table length400 mm
    Table width120 mm
    Min. clearance vertical spindle - milling table0 mm
    Max. clearance vertical spindle - milling table275 mm
    T-groove size10 mm
    T-groove number3
    T-groove spacing35 mm
    Standards and certifications
    StandardDIN EN 55011
    EMC levelC1
    Travel
    X axis manual220 mm
    Y axis manual160 mm
    Z axis manual210 mm
    Vertical spindle
    Reach170 mm
    Spindle chuckMT 2 / M10
    Speed range100 – 3000 min¯¹
    Number of gears2
    Speed controlelectronically adjustable
    Tightening barM 10
    Vertical spindle normal operation0,5 kW
    Swivel range milling cutter head Z - X plane± 90 °
    Quill stroke50 mm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Conical mandrel MK 2 / B16
    • Pulling rod M 10
    • operating tool

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.