• Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
  • Productimage for OPTImill MH 20VL
Brandimage to Product OPTImill MH 20VL

Drilling-milling machine

OPTImill MH 20VL

Stable drilling/milling machines with electronically infinitely variable drive and greater travel in the X-axis

1.779,00 EUR excl. Tax / pc(s).
2.117,01 EUR incl. 19% Tax / pc(s).
Promotional price *
1.649,00 EUR excl. Tax / pc(s).
1.962,31 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 31.08.2024 in Germany.

Art.-No. 3338132

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Precisely processed
    • High concentricity due to tapered roller bearings ≤ 0.015 mm measured in the sleeve
    • Motor with two-stage gear ratio for powerful transmission of motor power
    • Powerful DC motor with permanent current monitoring
    • Air filter for motor
    • New electrical system with improved motor protection (extended circuit board and circuit board for EMC)
    • Safety electrics in 24 volt version
    • Control electronics with integrated relay control
    • Massive and generously dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs
    • Adjustable end stops
    • Stable dovetail guide with adjustable gibs
    • Adjustable and readjustable feed spindle play
    • Emergency stop switch
    • Drilling/milling head can be tilted by ±60
    • Right/left rotation
    • Machine lamp
    • Double-row angular contact ball bearings in the axes, adjustable without play
    • Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user
    • Preparation for mounting the DRO5 digital position indicator in the X and Y axes (prepared groove for retrofitting the magnetic strips)
    • Lockable main switch

     

    Cross table
    Clearance vertical spindle - cross table255 mm
    Dimensions and weights
    Length approx.770 mm
    Width/depth approx.714 mm
    Height approx.917 mm
    Weight approx.99 kg
    Drilling/milling head
    Mill head swivel range± 60 °
    Drilling/milling output
    Max. size milling head52 mm
    Max. size shaft milling cutter20 mm
    Drilling performance steel (S235JR)16 mm
    Continuous drilling performance steel (S235JR)12 mm
    Electrical Data
    Supply voltage230 V
    Mains frequency50 Hz
    Milling table horizontal
    Table length700 mm
    Table width180 mm
    T-groove size12 mm
    T-groove number3
    T-groove spacing63 mm
    Max. load bearing capacity50 kg
    Standards and certifications
    StandardDIN EN 55011
    EMC levelC1
    Travel
    X axis manual480 mm
    Y axis manual175 mm
    Z axis manual210 mm
    Vertical spindle
    Reach170 mm
    Spindle chuckMK 2
    Speed range100 – 3000 min¯¹
    Number of gears2
    Speed controlelectronically adjustable
    Drive motor output S6-30 % operation0,75 kW
    Quill diameter60 mm
    Quill stroke50 mm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Tapered mandrel MK2/B16
    • Tightening rod M 10
    • Operating tool

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.