• Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
  • Productimage for OPTImill MH 22V
Brandimage to Product OPTImill MH 22V

Drilling-milling machine

OPTImill MH 22V

Stable, with electronically infinitely variable drive

2.510,00 EUR excl. Tax / pc(s).
2.986,90 EUR incl. 19% Tax / pc(s).
Promotional price *
2.239,00 EUR excl. Tax / pc(s).
2.664,41 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2023 in Germany.

Art.-No. 3338135

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • Precisely processed
    • Clear control panel with user-friendly membrane keypad
    • Safety electrics in 24 volt version
    • Easy-to-read digital display for speed and drilling depth
    • Emergency stop switch
    • Motor with two-stage gear ratio for powerful transmission of engine power
    • Powerful DC motor with permanent power monitoring
    • Control electronics with integrated relay control
    • Drilling milling head can be tilted by 60°, for milling and drilling work at any angle
    • Feed spindles play-free adjustable by adjustable spindle nuts
    • Right/Left Run
    • Machine lamp
    • High concentricity measured by tapered roller bearings of ≤ 0.015 mm in the pinole
    • Stable swallowtail guide with adjustable wedge strips
    • Massive precise surface-worked cross table with T-slots
    • Adjustable end stops
    • Drilling for light oiling of the trapezoidal spindle
    • Two-row angular ball bearings in the axes, play-free adjustable
    • Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user
    • Fine feed
    • X-, Y- and Z-axis with prepared groove for subsequent assembly of the magnetic tapes
    • Bellows as guide protection
    • Mechanical quick-release clamping system


    Cross table
    Clearance vertical spindle - cross table360 mm
    Dimensions and weights
    Length approx.745 mm
    Width/depth approx.650 mm
    Height approx.950 mm
    Weight approx.120 kg
    Drilling/milling head
    Mill head swivel range± 60 °
    Drilling/milling output
    Max. size milling head52 mm
    Max. size shaft milling cutter12 mm
    Drilling performance steel (S235JR)20 mm
    Continuous drilling performance steel (S235JR)16 mm
    Electrical Data
    Supply voltage230 V
    Mains frequency50 Hz
    Milling table horizontal
    Table length700 mm
    Table width180 mm
    T-groove size12 mm
    T-groove number3
    T-groove spacing63 mm
    Max. load bearing capacity50 kg
    Standards and certifications
    StandardDIN EN 55011
    EMC levelC2
    X axis manual480 mm
    Y axis manual175 mm
    Z axis manual270 mm
    Vertical spindle
    Reach170 mm
    Spindle chuckBT 20
    Speed range90 – 3000 min¯¹
    Number of gears2
    Speed controlelectronic
    Quill diameter60 mm
    Quill stroke45 mm
    Unit: pc(s).
    Packaging unit: 1




    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.