| Cooling lubricant system | |
|---|---|
| Coolant pump output | 0.125 kW |
Precision Center and Turning Center Lathe
OPTIturn TZ 4
with digital position indicator and quick-change steel holder
15.990,00
EUR excl. Tax / pc(s).
19.028,10
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3432240
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Hardened and ground Z-axis guideway
- Partial covering with entrained, large-dimensioned chip protection
- Chip protection with integrated position indicator, coolant hose and additional control panel
- Plan and upper slide spindle is hardened and ground and adjustable via split spindle nut
- Guide and feed shaft cover
- Fine graded feed and thread cutting area
- LED machine lamp for complete illumination of the working area
- Energy chain for gentle line and hose routing
- Change wheels optionally also available for inch and module threads
- Control cabinet with 24 V DC power supply
- Switch with life cycle calculation tested according to EN ISO 13849
- Decoupled handwheels tested to EN 23125
- Two-channel right-left switch tested to EN 23125
- All contactors and relays from Siemens or Schneider
- Safety handwheels with release function in the X and Z axis
- Forward removable chip tray
- Quick change steel holder SWH 5-B
- Steel holder 25 x 120 type D for square chisel 20 mm
TZ 4:
- Reduction of main spindle deceleration time by electrically braked motor
- Motor protection switch
| Dimensions and weights | |
|---|---|
| Length approx. | 1960 mm |
| Width/depth approx. | 1060 mm |
| Height approx. | 1690 mm |
| Weight approx. | 1250 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 3 / 4,5 kW |
| Total rated value | 6 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,0263 – 1,8416 mm/rev |
| Number of longitudinal feeds | 48 |
| Flat feed range | 0,0133 – 0,9321 mm/rev |
| Number of flat feeds | 48 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 14 mm/rev |
| Number of metric pitches | 26 |
| Imperial pitch | 80 – 1 Gg/1" |
| Number of imperial pitches | 42 |
| Diametrical pitch | 3 – 200 Gg/π |
| Number of diametrical pitches | 33 |
| Modular thread pitch | 0,1 – 7 mm/rev |
| Number of modular thread pitches | 44 |
| Speed range | |
|---|---|
| Number of gears | 16 |
| Speed range | 45 – 1800 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | DIN ISO 702-1 No. 5 Form A2 |
| Spindle bore/rod passage diameter | 52 mm |
| Chuck passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 110 mm |
| Quill diameter | 50 mm |
| Travel | |
|---|---|
| Travel upper slide | 112 mm |
| Travel cross slide | 212 mm |
| Travel carriage saddle | 800 mm |
| Work areas | |
|---|---|
| Center height | 200 mm |
| Distance between center | 800 mm |
| Swing diameter above machine bed | 400 mm |
| Swing diameter above planing slide | 245 mm |
| Bed width | 260 mm |
| VPE | 1 |
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Fixed bezel passage Ø 10 - 130 mm
- Running bezel passage Ø 10 - 100 mm
- Reduction sleeve MK3 and MK6
- Fixed centering point MK3
- Quick change steel holder 5-B
- Steel holder 25 x 120 type D for square chisels
- Change wheels set for metric thread
- Initial machine filling with quality oil
- operating tool
- Integrated cooling device
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
