• Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
  • Productimage for
Brandimage to Product

Motorized sheet metal shears

MTBS T

With NC-controlled backgauge, front and rear ejection and manual gap adjustment

From 28.450,00 EUR excl. Tax / pc(s).
From 33.855,50 EUR incl. 19% Tax / pc(s).
Promotional price *
From 24.199,00 EUR excl. Tax / pc(s).
From 28.796,81 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 29.02.2024 in Germany.

Are you interested in this product?
  • Put a request
  • Find Trader
  • Variations

    GeneralDimensions and weightsElectrical Data Price Promotional price *
    TitleArt.-No.Working width (mm)Cutting performance material tensile strength 400 N/mm² (mm)Cutting performance material tensile strength 450 N/mm² (mm)Cutting performance material tensile strength 700 N/mm² (mm)Number of sheet support arms (St)Cutting angle (°)Max. strokes for full cutting length (/min)VPE Table length (mm)Table depth (mm)Table height (mm)Machine body depth (mm)Length approx. (mm)Width/depth approx. (mm)Height approx. (mm)Weight approx. (kg)Absorbed power drive motor (kW)Total rated value (kW)EUR excl. TaxEUR incl. 19% TaxEUR excl. TaxEUR incl. 19% Tax
    MTBS 1350-30 T38156131350331.522,2401150742080068020702120111011903.5428.450,0033.855,5024.199,0028.796,81
    MTBS 1540-40T38156151540442.522401171853086087023202360128022406.276.834.990,0041.638,1029.799,0035.460,81
    MTBS 2100-40 T38156202100442.531,8381227853086087028802360128026508.45939.490,0046.993,1033.699,0040.101,81
    MTBS 2550-40T38156252550442.531,8381271853086087033202360128030508.45942.650,0050.753,5036.299,0043.195,81
    MTBS 3130-30 T38156303050331.531,5381330953086087039102360128036608.45949.190,0058.536,1041.899,0049.859,81
    MTBS 3130-40 T38156313050442.531,53813400530900108039102500150050008.45953.990,0064.248,1045.999,0054.738,81
    Select Attributes
    General
    Dimensions and weights
    Electrical Data
    Price
    Promotional price

    Productdetails

    • Pneumatic sheet support, sheet ejection to the front or rear controllable via toggle switch
    • Backgauge 750 mm guided on round shafts and driven via ball screw
    • Stainless steel table supports with transfer balls for comfortable material handling
    • Positioning control of the backgauge Maper HT071 with digital dimension display
    • Heavy and robust steel construction in welded design
    • Constant, low cutting angle for optimum cutting results
    • Side fence 1000 mm with scale and T-slot
    • Two material support arms 500 mm with T-slot
    • Balls in the support table for easier material transport
    • Cutting gap adjustment by means of vernier rings
    • High quality blade suitable for stainless steel
    • LED illumination of the cutting area
    • Continuous finger protection device
    • Mobile foot pedal with emergency stop switch
    • All moving parts with low-maintenance bearings
    • Electrical system from Siemens and Schneider

     

    • Thin sheets are supported in order to be able to apply dimensionally to the backgauge
    • pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
    • Operator can choose if the section falls into the back room or the operator side

     

    Rear stop adjustment range up to750 mm
    Rear stop speed28 mm/s
    Side stop length1000 mm
    Motor output rear stop0.37 kW
    Cutting kerf adjustment min.0.05 mm
    Cutting kerf adjustment max.0.4 mm
    Electrical Data
    Supply voltage400 V
    Mains frequency50 Hz
    Unit: pc(s).

     

     

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.