| Explanation to cutting performances | with limited material length |
| Rear stop adjustment range up to | 1000 mm |
| Rear stop speed | 120 mm/s |
| Side stop length | 1500 mm |
| Motor output rear stop | 0.37 kW |
Hydraulic swing cut sheet metal shears
HTBS BASIC S
Equipped with metal slide and motorized cutting gap adjustment
Price upon request
Prices are recommended retail prices. Retailer prices may vary.
Are you interested in this product?
Put a request
Find Trader
Variations
| General | Dimensions and weights | Electrical Data | Price | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Title | Art.-No. | Working width (mm) | Cutting performance material tensile strength 400 N/mm² (mm) | Cutting performance material tensile strength 700 N/mm² (mm) | Number of hold-down units (St) | Number of sheet support arms (St) | Cutting angle (°) | Max. strokes for full cutting length (/min) | Cutting kerf adjustment min. (mm) | Cutting kerf adjustment max. (mm) | Oil tank capacity (l) | VPE | Table length (mm) | Table depth (mm) | Table height (mm) | Length approx. (mm) | Width/depth approx. (mm) | Height approx. (mm) | Weight approx. (kg) | Drive motor output (kW) | EUR excl. Tax | EUR incl. 19% Tax | |
| HTBS BASIC S 2006 | 4205020 | 2060 | 6 | 4 | 12 | 2 | 1,5 | 24 | 0.05 | 0,6 | 180 | 1 | 2320 | 485 | 800 | 2900 | 3120 | 1900 | 5100 | 11 | Price upon request | - | |
| HTBS BASIC S 2010 | 4205021 | 2060 | 10 | 6 | 12 | 2 | 1,5 | 12 | 0.05 | 1 | 300 | 1 | 2370 | 585 | 900 | 2950 | 3450 | 2200 | 7600 | 22 | Price upon request | - | |
| HTBS BASIC S 2506 | 4205026 | 2560 | 6 | 4 | 15 | 2 | 1,5 | 22 | 0.05 | 0,6 | 180 | 1 | 2820 | 485 | 800 | 3530 | 3120 | 1900 | 5450 | 11 | Price upon request | - | |
| HTBS BASIC S 2510 | 4205027 | 2560 | 10 | 6 | 14 | 2 | 1,5 | 12 | 0.05 | 1 | 300 | 1 | 2870 | 585 | 900 | 3460 | 3450 | 2200 | 8300 | 22 | Price upon request | - | |
| HTBS BASIC S 3006 | 4205030 | 3060 | 6 | 4 | 17 | 2 | 1,5 | 20 | 0.05 | 0,6 | 180 | 1 | 3320 | 485 | 800 | 3900 | 3120 | 1900 | 6550 | 11 | Price upon request | - | |
| HTBS BASIC S 3010 | 4205031 | 3060 | 10 | 6 | 16 | 2 | 1,5 | 12 | 0.05 | 1 | 300 | 1 | 3370 | 585 | 900 | 3950 | 3450 | 2200 | 10200 | 22 | Price upon request | - | |
| HTBS BASIC S 3013 | 4205032 | 3060 | 13 | 8 | 16 | 2 | 1,8 | 12 | 0.08 | 1.3 | 400 | 1 | 3440 | 600 | 900 | 3950 | 3650 | 2300 | 12100 | 30 | Price upon request | - | |
| HTBS BASIC S 3016 | 4205033 | 3060 | 16 | 10 | 16 | 2 | 2 | 10 | 0.08 | 1.6 | 500 | 1 | 3500 | 600 | 900 | 4050 | 3650 | 2300 | 16100 | 37 | Price upon request | - | |
| HTBS BASIC S 4006 | 4205040 | 4060 | 6 | 4 | 21 | 3 | 1,2 | 12 | 0.05 | 0,6 | 180 | 1 | 4330 | 485 | 850 | 4950 | 3120 | 1900 | 9510 | 11 | Price upon request | - | |
| HTBS BASIC S 4010 | 4205041 | 4060 | 10 | 6 | 20 | 3 | 1,5 | 10 | 0.05 | 1 | 350 | 1 | 4400 | 585 | 900 | 5000 | 3450 | 2100 | 13800 | 30 | Price upon request | - | |
| HTBS BASIC S 4013 | 4205042 | 4060 | 13 | 8 | 20 | 3 | 1,8 | 8 | 0.08 | 1.3 | 450 | 1 | 4440 | 600 | 900 | 5040 | 3650 | 2300 | 16500 | 37 | Price upon request | - | |
| HTBS BASIC S 4016 | 4205043 | 4060 | 16 | 10 | 20 | 3 | 2 | 6 | 0.08 | 1.6 | 500 | 1 | 4500 | 600 | 900 | 5060 | 3650 | 2300 | 20500 | 45 | Price upon request | - | |
Select Attributes
General
- Working width
- Cutting performance material tensile strength 400 N/mm²
- Cutting performance material tensile strength 700 N/mm²
- Number of hold-down units
- Number of sheet support arms
- Cutting angle
- Max. strokes for full cutting length
- Cutting kerf adjustment min.
- Cutting kerf adjustment max.
- Oil tank capacity
- VPE
Dimensions and weights
- Table length
- Table depth
- Table height
- Length approx.
- Width/depth approx.
- Height approx.
- Weight approx.
Electrical Data
- Drive motor output
Price
- excl. Tax
- incl. 19% Tax
Productdetails
Standard version:
- touchscreen NC-control CybTouch 8 in swivel arm
- NC-controlled backgauge (5-1000mm) driven üvia ball screws
- safety light barrier for the back area
- motorized cutting gap adjustment üvia the control unit
- Side stop 1500mm with scale and T-slot
- Front support arms 1000mm with T-slot
- Table supports made of stainless steel with integrated transfer balls
- Hold-down device with plastic caps to protect the material
- Variable cutting length adjustment via the control unit
- Folding finger guard 1000mm with viewing glass inserts
- Sheet metal chute in the rear area
- Cutting line illumination with shadow crack
- Knives suitable for cutting stainless steel
- Upper knife with two and lower knife with four cutting edges
- Electrical components from Schneider and Mitsubishi
Equipment options:
- Adjustable angle stop
- Cutting line display by laser
- Front light barrier instead of finger protection
- Finger guard can be folded out over the entire length
- Additional front support arms
- Additional side stop on the right
- Extensions of the standard support arms, side or back stop
- Transfer ball in the side stop and the front support arms
- Servo motor for the back stop
- Manual or automatic central lubrication
- Pneumatic sheet metal holding systems
- Small parts switch with manual or pneumatic opening
- Oil cooler or oil warmer
- touch screen NC-control CybTouch 8 in swivel arm
- NC-controlled backgauge (5-1000mm) driven by ball screws
- Safety light barrier for the rear area
- motorized cutting gap adjustment via the control
- side stop 1500mm with scale and T-slot
- Two front support arms 1000mm
- Table supports made of stainless steel with integrated transfer balls
- Folding finger guard 1000mm with viewing glass sowingtzen
- upper knife with two and lower knife with four cutting edges
- Extensive options available
| Electrical Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Unit: pc(s).
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.