CRAFT-STICK PRO 161P

• Constructed using modern inverter technology
• Universally applicable for welding all common electrode types
• Best suited for assembly work due to protection class IP 21S generally also for outdoor work
• Suitable for use on the generator, for example in workshops, schools, metal construction, on construction sites or for farmers
• Protected against moisture, salt spray and corrosion by sealed circuit board. Therefore also suitable for offshore use
• With power factor correction PFC for problem-free use even on cable drums
• Equipped with VRD for voltage reduction in no-load operation
• TIG DC function enables simple TIG welding with contact ignition
• Accurate setting and display of welding parameters via LC display
• Quiet running fan with good heat dissipation for high switch-on times
• Constant welding current achieves consistent deposition rate
• Hot Start: By automatically increasing the welding current for a short time, the arc ignites safely and is immediately stable
• Anti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from annealing
• Arc-Force control: Due to the internal monitoring of welding current and welding voltage, short-circuits are quickly and safely resolved, thus stabilising the arc and allowing the electrode to be processed without any problems

You will receive the 3-year Stürmer warranty for this item when you register online.

• Welding cable 4 m, 16 mm² with electrode holder 300 A
• Ground cable 4 m, 16 mm² with ground clamp 300 A