• DE
  • EN
    • DownloadsGuarantee TermsContactTerms and conditionsPrivacy StatementImprint
    1. Stürmer Maschinen
    2. Products
    3. Welding technology
    4. Electrode Inverter
    5. CRAFT-STICK PRO 403 CEL
    • Productimage for CRAFT-STICK PRO 403 CEL
    • Productimage for CRAFT-STICK PRO 403 CEL
    • Productimage for CRAFT-STICK PRO 403 CEL
    • Productimage for CRAFT-STICK PRO 403 CEL
    Brandimage to Product CRAFT-STICK PRO 403 CEL

    Electrode Inverter

    CRAFT-STICK PRO 403 CEL

    Welding machine for highest demands

    Price upon request

    Prices are recommended retail prices. Retailer prices may vary.

    Art.-No. 1363403

    Are you interested in this product?
  • Put a request
  • Find Trader

    • Productdetails

    • Suitable for welding with cellulose electrodes
    • Universally applicable for welding all common electrode types
    • Best suited for assembly work due to protection class IP 21S generally also for outdoor work
    • Suitable for use on generators, for example in workshops, schools, metal construction, on construction sites or for farmers
    • Protected against moisture, salt spray and corrosion due to sealed circuit board. Therefore also suitable for offshore use
    • Equipped with VRD for voltage reduction in no-load operation
    • TIG DC function enables simple TIG welding with contact ignition
    • Accurate setting and display of welding parameters via LC display
    • Quiet running fan with good heat dissipation for high switch-on times
    • Constant welding current achieves consistent deposition rate
    • Hot Start: By automatically increasing the welding current for a short time, the arc ignites safely and is immediately stable
    • Anti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from annealing
    • Arc-Force control: Due to the internal monitoring of welding current and welding voltage, short-circuits are quickly and safely resolved, thus stabilising the arc and allowing the electrode to be processed without any problems

     

    Dimensions and weights
    Length approx.532 mm
    Width/depth approx.216 mm
    Height approx.405 mm
    Weight approx.19.9 kg
    Duty cycle
    at Imax. 40°C electrode60 %
    at Imax. 40°C TIG DC60 %
    Current at 100% DC 40°C electrode310 A
    Current at 100% DC 40°C TIG DC310 A
    Electrical connections
    Input current electrode24,5 A
    Input current TIG18.1 A
    Total output22.4/17.3 kVA
    Electrical Data
    Supply voltage400 V
    Mains frequency50/60 Hz
    Electrode
    Weldable electrodes1,6 - 5,0 mm
    Power consumption
    Electrode16.4 kVA
    TIG DC12.4 kVA
    Setting range
    Electrode10 – 400 A
    TIG DC10 – 400 A
    Standards and certifications
    StandardEN 60974-1:2012, EN 60974-10:2014
    EMC classA
    Explanation EMC classThis Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system.
    MarkingCE
    VPE1
    Unit: pc(s).
    Packaging unit: 1

    • Welding cable 4 m, 50 mm² with electrode holder 500 A
    • Ground cable 4 m, 50 mm² with ground clamp 500 A

     

    TIG function✔
    Anti-Stick✔
    ArcForce✔
    HotStart✔
    VRD operation✔
    LC display4 "

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.