| Explanation technical data | Data in brackets for 110 volt models |
| VPE | 1 |
Plasma cutting equipment
CRAFT-CUT PRO 41P
For the strictest requirements
Price upon request
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 1365041
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Suitable for use on the generator e.g. in operating workshops, ports, chemical plants, schools, metal construction, on construction sites, ships or for farmers
- Quiet running fans with good heat dissipation for high duty cycles
- For stainless steel, aluminum, steel, non-ferrous metals also with painted surface
- From thin sheets to heavy plates
- Pilot ARC-Controller: Only after ignition of the arc the set welding current is released
- With 2- and 4-stroke function
- CRAFT-CUT PRO 41P with power factor correction PFC for trouble-free use even on cable drums
- Precise setting and display of welding parameters via LC display
- Integrated filter pressure regulator for setting the cutting pressure
| Cutting performance | |
|---|---|
| Quality cutting steel (ST37) max. | 15 mm |
| Separating cut steel (ST37) max. | 20 mm |
| Quality cutting stainless steel max. | 15 mm |
| Separating cut stainless steel max. | 20 mm |
| Quality cutting aluminium max. | 16 mm |
| Separating cut aluminium max. | 18 mm |
| Device data | |
|---|---|
| Air consumption | 120 l/min |
| Pressure | 5 bar |
| Dimensions and weights | |
|---|---|
| Length approx. | 490 mm |
| Width/depth approx. | 150 mm |
| Height approx. | 290 mm |
| Weight approx. | 8.1 kg |
| Duty cycle | |
|---|---|
| Duty cycle plasma | 50 (35) % |
| Current at 100% DC 40°C Plasma | 30 (20) A |
| Electrical connections | |
|---|---|
| Input current | 20 (31.8) A |
| Electrical Data | |
|---|---|
| Supply voltage | 230 (110) V |
| Mains frequency | 50/60 Hz |
| Setting range | |
|---|---|
| Adjusting range plasma approx. | 20 (20) – 40 (30) A |
| Standards and certifications | |
|---|---|
| Standard | EN 60974-1:2012, EN 60974-10:2014 |
| EMC class | A |
| Explanation EMC class | This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. |
| Marking | CE |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Plasma torch S65 6m
- Ground cable 4 m, 6 mm² with ground terminal 300 A
| LC display | 2,8 " |
| PFC operation | ✔ |
| Pilot ARC control | ✔ |
| 2-stroke function | ✔ |
| 4-stroke function | ✔ |
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
