| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Guide and traction spindle lathes
OPTIturn TH 4210D
Precise machine with digital position indicator DPA 31Plus - sophisticated technology, complete equipment, easy to operate
12.995,00
EUR excl. Tax / pc(s).
15.464,05 EUR incl. 19% Tax / pc(s).
15.464,05 EUR incl. 19% Tax / pc(s).
Promotional price *
12.699,00 EUR excl. Tax / pc(s).15.111,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.
Art.-No. 3462055
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 6
- Lead screw cover
- Precisely machined slide
- All guides can be adjusted using wedge strips
- Right/left rotation on bed slide switchable via switching spindle
- Two-channel safety electronics
- Central lubrication in the bed slide
- Upper slide adjustment range ± 90
- Main spindle runs in oil bath
- Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
- Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
- Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
- Substructure and machine bed cast in one piece from Meehanite cast iron
- Emergency stop device with foot actuation
- Quadruple steel holder
You will receive the 3-year Stürmer warranty for this item when you register online.
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 1940 mm |
| Width/depth approx. | 915 mm |
| Height approx. | 1375 mm |
| Weight approx. | 1162 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 4,5 kW |
| Total rated value | 4.6 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 1,7 mm/rev |
| Number of longitudinal feeds | 17 |
| Flat feed range | 0,025 – 0,85 mm/rev |
| Number of flat feeds | 17 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 14 mm/rev |
| Number of metric pitches | 39 |
| Imperial pitch | 72 – 2 Gg/1" |
| Number of imperial pitches | 45 |
| Diametrical pitch | 8 – 44 |
| Number of diametrical pitches | 21 |
| Modular thread pitch | 0,3 – 3,5 mm/rev |
| Number of modular thread pitches | 18 |
| Speed range | |
|---|---|
| Number of gears | 16 |
| Speed range | 45 – 1800 min-1 |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 6 |
| Spindle bore/rod passage diameter | 52 mm |
| Tool holder max. chuck height | 20 mm |
| Spindle cone | MT 6 |
| Tailstock | |
|---|---|
| Chuck | MT 4 |
| Quill stroke | 120 mm |
| Quill diameter | 50 mm |
| Travel | |
|---|---|
| Travel upper slide | 140 mm |
| Travel cross slide | 230 mm |
| Travel carriage saddle | 780 mm |
| Work areas | |
|---|---|
| Center height | 210 mm |
| Distance between center | 1000 mm |
| Swing diameter above machine bed | 420 mm |
| Swing diameter in bed bridge | 590 mm |
| Swing diameter above planing slide | 250 mm |
| Turning length in bed bridge | 260 mm |
| Bed width | 250 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Fixed bezel passage Ø 10 - 130 mm
- Running bezel passage Ø 10 - 100 mm
- LED machine light
- Reduction sleeve MK 6 / MK 4
- Fixed centering point MK 4
- Change gear set
- Position stop with fine adjustment
- Initial machine filling with quality oil
- operating tool
TH 4210 / TH 4210D / TH 4215D
- Quadruple steel holder max. 20 mm
TH 4210V
- Quick change steel holder 5-B
- Steel holder 25 x 120 type D for square chisels
Do not forget the lathe chuck!
| Digital position indicator | DPA 31 Plus |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
