| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Precision center lathe and draw spindle lathe
OPTIturn TX 4814V
Meets the highest requirements in terms of technical equipment and precision
21.839,00
EUR excl. Tax / pc(s).
25.988,41
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3432425
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
- All gear wheels of the feed gear made of hardened steel
- Shafts on needle bearings, all components are lubricated in an oil bath
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Service-friendly removable rear panel
- Energy chain for gentle cable and hose guidance
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- Handwheels decoupled and tested in accordance with EN 23125
- Two-channel safety electronics
- No change wheels necessary
- Switch with life cycle calculation tested in accordance with EN ISO 13849
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Bed guides hardened and precision ground
- Electronically braked motor
- Electronic feed cut-off of the Z-axis
- Electric position cut-off with quadruple position stop
- Three-jaw lathe chuck included as standard
- Digital position indicator DPA 32 with cutting constant VSC
| Dimensions and weights | |
|---|---|
| Length approx. | 2288 mm |
| Width/depth approx. | 1050 mm |
| Height approx. | 1740 mm |
| Weight approx. | 1700 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 5.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 0,752 mm/rev |
| Number of longitudinal feeds | 44 |
| Flat feed range | 0,025 – 0,376 mm/rev |
| Number of flat feeds | 44 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 – 7,5 mm/rev |
| Number of metric pitches | 44 |
| Speed range | |
|---|---|
| Number of gears | 6 Steps |
| Speed range | 20 – 2500 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Spindle cone | MT 7 |
| Travel | |
|---|---|
| Travel upper slide | 153 mm |
| Travel cross slide | 290 mm |
| Work areas | |
|---|---|
| Max. height | 240 mm |
| Max. width | 1260 mm |
| Swing diameter above machine bed | 480 mm |
| Bed width | 300 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Operating tool
- Initial machine filling with quality oil
- Three-jaw lathe chuck Ø 200 mm
- Camlock no. 8
- Two non-rotating centers MT6 and MT5
- Quick-change holder SWH 5-B
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
