| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Conventional Centre Lathe
OPTIturn TX 5216 - DPA 32-3
meets the highest requirements in terms of technical equipment and precision
26.385,00
EUR excl. Tax / pc(s).
31.398,15
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3432442
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing due to heavily ribbed 25GG casting
- Precisely machined slide
- Shafts on needle bearings, all components are lubricated in an oil bath
- Bed guides hardened and precision ground
- All electronic controls can be reached centrally
- All gear wheels of the feed gear made of hardened steel
- Handwheels decoupled and tested in accordance with EN 23125
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Complete lead and pull spindle cover
- Complete illumination of the work area
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- Service-friendly removable rear panel
- No change wheels necessary
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Electronically braked motor
- Electronic feed cut-off of the Z-axis
- Electrical position switch-off with quadruple position stop
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
- Three-jaw lathe chuck included as standard
- Large spindle bore
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 100 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 3016 mm |
| Width/depth approx. | 1270 mm |
| Height approx. | 2217 mm |
| Weight approx. | 2470 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 5.5 kW |
| Total rated value | 6.1 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Speed range | |
|---|---|
| Number of gears | 12 |
| Speed range | 30 – 1500 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Spindle cone | MT 7 |
| Tailstock | |
|---|---|
| Chuck | MT5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel | |
|---|---|
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 1400 mm |
| Work areas | |
|---|---|
| Max. height | 260 mm |
| Max. width | 1600 mm |
| Swing diameter above machine bed | 520 mm |
| Swing diameter above planing slide | 324 mm |
| Turning length in bed bridge | 780 mm |
| Bed width | 350 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three jaw chucks
- Reduction sleeve MK 7 / MK 5
- Fixed center point MK 5 long
- Fixed centering point MK 5 short
- Quick change steel holder SWH 7-C (TX 5216)
- Quick change steel holder SWH 7-C (TX 6222)
- Steel holder 25 x 120 type D for square chisels
- operating tool
| Digital position indicator | DPA 32 |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
