| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Conventional Centre Lathe
OPTIturn TM 3110VB
with electronic speed control
5.005,00
EUR excl. Tax / pc(s).
5.955,95 EUR incl. 19% Tax / pc(s).
5.955,95 EUR incl. 19% Tax / pc(s).
Promotional price *
4.699,00 EUR excl. Tax / pc(s).5.591,81 EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
* Promotional price valid until 28.02.2026 in Germany.
Art.-No. 3403016
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Tempered and polished Z-axis guide rail
- Spindle holder Camlock DIN ISO 702-2 No. 4
- Guaranteed concentricity of spindle nose better than 0.015 mm
- Free moving feed gear with rounded gear wheels running in an oil bath
- Emergency stop push button
- Tempered main spindle borne on adjustable, precision taper roller bearings
- Hand wheels on slide with adjustable fine scaling 0.04 / 0.01 mm
- Ribbed grey cast steel prism bed with strong ribbing, induction tempered and precision ground
- Concentricity at chuck better than 0.04 mm
- Quadruplicate tool holder
- All guides adjustable using cleats
- Tempered spindle nose
- Leading spindle for thread tapping or automatic longitudinal turning
- Leading and feed spindles borne on two sintered bearings
- Automatic longitudinal/cross feeds
- Tailstock adjustable ± 5 mm for turning spheres
- Tailstock spindle sleeve and handwheel with adjustable fine scaling 0.02 mm
- Fast, easy adjustment of tailstock without tools thanks to clamping lever
You will receive the 3-year Stürmer warranty for this item when you register online.
| Dimensions and weights | |
|---|---|
| Length approx. | 1632 mm |
| Width/depth approx. | 770 mm |
| Height approx. | 540 mm |
| Weight approx. | 360 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 1,5 kW |
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,02 – 0,4 mm/rev |
| Number of longitudinal feeds | 24 |
| Flat feed range | 0,01 – 0,2 mm/rev |
| Number of flat feeds | 32 |
| Pitches | |
|---|---|
| Metric pitch | 0,4 – 10 mm/rev |
| Number of metric pitches | 29 |
| Imperial pitch | 56 – 4 Gg/1" |
| Speed range | |
|---|---|
| Number of gears | 3 Steps |
| Speed range | 50 – 2500 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 |
| Spindle bore/rod passage diameter | 38 mm |
| Tool holder max. chuck height | 16 mm |
| Spindle cone | MK 5 |
| Tailstock | |
|---|---|
| Chuck | MK 3 |
| Quill stroke | 100 mm |
| Quill diameter | 38 mm |
| Travel | |
|---|---|
| Travel upper slide | 90 mm |
| Travel cross slide | 168 mm |
| Travel carriage saddle | 850 mm |
| Work areas | |
|---|---|
| Center height | 155 mm |
| Distance between center | 1000 mm |
| Swing diameter above machine bed | 310 mm |
| Swing diameter above planing slide | 216 mm |
| Bed width | 190 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 160 mm, No. 4
- Reducing sleeve MK 5 / MK 3
- Two non-moving center points MK 3
- Quadruple steel holder 25 mm
- Set of change gears
- Machine initial filling with quality oil
- Operating tool
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
