| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Milling machine
OPTImill MH 15V
With electronically adjustable drive
1.125,00
EUR excl. Tax / pc(s).
1.338,75
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3338110
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Two-stage gear shift
- The drill head can be tilted by 45°, enabling milling and drilling work at any angle
- Double-layer height-adjustable spindle guard
- Simple and clear control panel
- With 24V low voltage
- Feed spindles can be adjusted backlash-free thanks to adjustable spindle nuts
- Robust cross table with T-slots and coolant channels
- With micro feed
| Cross table | |
|---|---|
| Clearance vertical spindle - cross table | 250 mm |
| Dimensions and weights | |
|---|---|
| Length approx. | 504 mm |
| Width/depth approx. | 515 mm |
| Height approx. | 800 mm |
| Weight approx. | 58.5 kg |
| Drilling/milling head | |
|---|---|
| Drill-mill head tilt range | ±45 ° |
| Mill head swivel range | ± 90 ° |
| Drilling/milling output | |
|---|---|
| Max. size milling head | 50 mm |
| Max. size shaft milling cutter | 13 mm |
| Drilling performance steel (S235JR) | 13 mm |
| Continuous drilling performance steel (S235JR) | 11 mm |
| Electrical Data | |
|---|---|
| Drive motor output | 0.5 kW |
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Milling table horizontal | |
|---|---|
| Table length | 400 mm |
| Table width | 120 mm |
| T-groove size | 10 mm |
| T-groove number | 3 |
| T-groove spacing | 35 mm |
| Travel | |
|---|---|
| X axis manual | 240 mm |
| Y axis manual | 135 mm |
| Z axis manual | 150 mm |
| Vertical spindle | |
|---|---|
| Reach | 145 mm |
| Spindle chuck | MT 2 |
| Speed range | 90 – 2250 min¯¹ |
| Number of gears | 2 Steps |
| Speed control | electronically adjustable |
| Tightening bar | M10 |
| Quill diameter | 60 mm |
| Quill stroke | 50 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Drill chuck 1-13 mm
- taper shank
- T-nut
- Operating tool
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
Accessories
Optional parts
Optional parts can not be retrofitted and are available only when ordering new machines.