| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Lathe
OPTIturn TU 1503V
The smallest lathe with electronically adjustable speed
899,00
EUR excl. Tax / pc(s).
1.069,81
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3420260
Are you interested in this product?
Put a request
Find Trader
Productdetails
- DC motor
- Verrippt prism bed made of gray cast iron, inductively hardened and ground
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Concentricity - lathe chuck max 0.05 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Longitudinal, level and upper slide
- Automatic longitudinal / lead screw drive
- Large threading area due to change gear set
- 3-jaw lathe chuck in the standard scope of delivery
- Easy and fast speed change via V-belt
- Safety switch in the cover
- Right / left rotation in the control panel switchable
- Chuck protection with microswitch
- Handwheels with adjustable fine scale 0.04 / 0.01 mm
- All guides can be adjusted without clearance by means of wedge strips
- Emergency stop impact switch
- Low voltage electronics
- EMC filter class C1
| Dimensions and weights | |
|---|---|
| Length approx. | 570 mm |
| Width/depth approx. | 340 mm |
| Height approx. | 300 mm |
| Weight approx. | 23 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 0,45 kW |
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,05 – 0,1 mm/rev |
| Number of longitudinal feeds | 2 |
| Pitches | |
|---|---|
| Metric pitch | 0,5 – 1,5 mm/rev |
| Number of metric pitches | 8 |
| Diametrical pitch | 30 |
| Speed range | |
|---|---|
| Number of gears | 1 |
| Speed range | 120 – 3000 min¯¹ |
| Speed control | electronically adjustable |
| Spindle | |
|---|---|
| Spindle chuck | cylindrical Ø 22 |
| Spindle bore/rod passage diameter | 11 mm |
| Tool holder max. chuck height | 12 mm |
| Spindle cone | MT 1 |
| Standards and certifications | |
|---|---|
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Tailstock | |
|---|---|
| Chuck | Shortened MT 1 |
| Quill stroke | 30 mm |
| Travel | |
|---|---|
| Travel upper slide | 40 mm |
| Travel cross slide | 55 mm |
| Travel carriage saddle | 270 mm |
| Work areas | |
|---|---|
| Max. height | 75 mm |
| Max. width | 265 mm |
| Swing diameter above planing slide | 70 mm |
| Bed width | 70 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Three-jaw lathe chuck Ø 80 mm,
centrically exciting - Fixed center point MK1
- bulkhead
- chip pan
- Change gear set
- Double tool holder
- operating tool
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
