| Cutting ranges | |
|---|---|
| 0° round (pipe) | 340 mm |
| 0° round (full material) | 340 mm |
| 0° rectangle horizontal (hollow) | 350 x 340 mm |
| 0° rectangle horizontal (full material) | 350 x 260 mm |
Horizontal metal band saw
HMBS 340 CNC PP CALIBER
Fully automatic band saw with Mitsubishi control
27.550,00
EUR excl. Tax / pc(s).
32.784,50
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3693095
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Bandsaw guided over two columns for sawing solid bars and bar profiles
- Mitsubishi FX 5 control system with simple operation via 7" color touchscreen
- Optimized for series production - higher efficiency suitable for mass production
- Semi-automatic operating mode (manual) - direct cutting with manual positioning or GTO (go to position) positioning
- Automatic operating mode - program-controlled feed with up to 100 storable cutting programs
- Saw blade guidance and clamping: Carbide guides with vibration-damped elements, hydraulic blade clamping with automatic pressure monitoring
- Efficient cooling and cleaning: Coolant supply via LocLine system, powered cleaning brush optionally available
- Material feed via recirculating ball screw guarantees even cuts, high repeat accuracy and optimized tool utilization
- Cutting feed consisting of servo motor and hydraulic throttle valves enable precise adjustment of the cutting speed for optimum cutting performance
- RZP-2 - Zone-based cutting control: the speed can be higher when approaching the material (zone 1), the speed is reduced when penetrating the solid material (zone 3-4), increasing the service life of the saw blade and improving the cutting quality
- ARP - Automatic feed control: automatically adjusts the cutting feed to the material resistance (e.g. hard vs. soft steel), reacts to saw blade wear (e.g. blunt teeth) for consistently high cutting quality
- BIMETALL mode: Optimized for cutting profiled materials with bi-metal saw blades
- CARBIDE mode: suitable for cutting solid materials with carbide saw blades
- CMU mode: opens the cutting zone on the feed side, enables contact-free return stroke of the saw blade, particularly suitable for carbide saw blades, protects the tool and extends the service life
- Band saw guided by two columns for sawing solid bars and bar profiles
- Mitsubishi FX 5 control system with simple operation via 7" color touchscreen
- Optimized for series production - higher efficiency suitable for mass production
| Dimensions and weights | |
|---|---|
| Work table height | 800 mm |
| Length approx. | 3122 mm |
| Width/depth approx. | 1841 mm |
| Height approx. | 1943 mm |
| Weight approx. | 1580 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 4 kW |
| Engine power hydraulic pump | 0.75 kW |
| Engine power coolant pump | 0.12 kW |
| Total connected load | 8.2 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Saw band speed(s) | 20 – 100 m/min |
| Saw band length | 4600 mm |
| Saw band width | 34 mm |
| Saw band thickness | 1.1 mm |
| Feed | ball screw |
| Material feed | |
|---|---|
| Speed | 3 m/min |
| Material feed max. at 1 x feed rate | 510 mm |
| Material feed max. | 9999 mm |
| Material feed min. | 3 mm |
| Table height material feed | 800 mm |
| Cut-off length min. | 15 mm |
| Material diameter min. | 10 mm |
| Min. residual workpiece length | 20 mm |
| Min. remaining workpiece length automatic | 210 mm |
| Product information EU 2023/2854 | |
|---|---|
| Type of the generated data | Usage data |
| Format of the generated data | Common, machine-readable formats such as JSON |
| Amount of data | Up to 5 MB |
| Continuous data generation in real time | Yes |
| Data storage location | On the device |
| Data access | On the device and via physical interfaces |
| Further information | In the operating instructions or at info@stuermer-maschinen.de |
| VPE | 1 |
| Sicherheits- und Warnhinweise | |
| Sicherheitsdatenblatt | |
| Safety and warning notices | |
| Productinformations in accordance with Regulation (EU) 2023/2854 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
| Control | Mitsubishi FX 5 with 7" touchscreen |
| Coolant pump | ✔ |
| Belt tension monitoring | Hydraulic saw band tensioning |
| Belt feed monitoring | BRP |
| Saw feed | hydraulic |
| Saw return stroke | hydraulic |
| Control panel | swivable |
| Chip clearing brush | driven electrically |
| Vise | two-part in front and behind the cut / hydraulic pressure adjustment |
| Work area lighting | LED |
| Chip conveyor | ✔ |
| Chip container | ✔ |
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt
Deutschland / Germany
info@stuermer-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
