| Data sheets | |
|---|---|
| Sicherheits- und Warnhinweise | |
| Safety and warning notices |
Conventional Centre Lathe
OPTIturn TH 5620D
Heavy machine characterized by high flexibility, precision and economy. With digital position indicator DPA 31 Plus and quick-change steel holder.
24.700,00
EUR excl. Tax / pc(s).
29.393,00
EUR incl. 19% Tax / pc(s).
Prices are recommended retail prices. Retailer prices may vary.
Art.-No. 3462170
Are you interested in this product?
Put a request
Find Trader
Productdetails
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose ≤ 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 8
- Lead screw cover
- Precisely machined slide
- All guides can be adjusted using gibs
- Right/left rotation on bed slide switchable via switching spindle
- Two-channel safety electronics
- Central lubrication in the bed slide
- Upper slide adjustment range ± 90
- Main spindle runs in oil bath
- Shafts and wheels running in oil bath
- Gear wheels smooth-running, hardened, ground and mounted with 2 adjustable precision tapered roller bearings
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
- Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
- Clearly arranged selector lever for switching the feed speeds
- Closed design of the high-speed feed gearbox
- Emergency stop impact switch, motor protection switch, lockable main switch
- Emergency stop device with foot actuation
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and handwheel with adjustable fine scaling 0.025 mm. Quick, easy and tool-free adjustment by means of clamping lever
- Energy chain for gentle cable and hose guidance
- Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
- Adjustable scale of the thread gauge
| Cooling lubricant system | |
|---|---|
| Coolant pump output | 125 W |
| Dimensions and weights | |
|---|---|
| Length approx. | 3450 mm |
| Width/depth approx. | 1150 mm |
| Height approx. | 1650 mm |
| Weight approx. | 2560 kg |
| Electrical Data | |
|---|---|
| Drive motor output | 7,5 kW |
| Total rated value | 8.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Feed | |
|---|---|
| Longitudinal feed range | 0,059 – 1,646 mm/rev |
| Number of longitudinal feeds | 35 |
| Flat feed range | 0,020 – 0,573 mm/rev |
| Number of flat feeds | 35 |
| Pitches | |
|---|---|
| Metric pitch | 0,2 – 14 mm/rev |
| Number of metric pitches | 47 |
| Imperial pitch | 112 – 2 Gg/1" |
| Number of imperial pitches | 60 |
| Diametrical pitch | 4 – 112 DPI |
| Number of diametrical pitches | 50 |
| Modular thread pitch | 0,1 – 7 mm/rev |
| Number of modular thread pitches | 34 |
| Speed range | |
|---|---|
| Number of gears | 12 |
| Speed range | 25 – 1600 min¯¹ |
| Spindle | |
|---|---|
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Tool holder max. chuck height | 25 mm |
| Spindle cone | MT 7 |
| Tailstock | |
|---|---|
| Chuck | MK 5 |
| Quill stroke | 180 mm |
| Quill diameter | 75 mm |
| Travel | |
|---|---|
| Travel upper slide | 130 mm |
| Travel cross slide | 316 mm |
| Travel carriage saddle | 1710 mm |
| Work areas | |
|---|---|
| Max. height | 280 mm |
| Max. width | 1910 mm |
| Swing diameter above machine bed | 560 mm |
| Swing diameter in bed bridge | 790 mm |
| Swing diameter above planing slide | 355 mm |
| Turning length in bed bridge | 170 mm |
| Bed width | 350 mm |
| VPE | 1 |
Unit: pc(s).
Packaging unit: 1
Packaging unit: 1
- Fixed bezel passage max. Ø 165 mm
- Running bezel passage max. Ø 95 mm
- LED machine light
- TH 5615D-TH 5630D: Reduction sleeve MK 7 / MK 5
- TH 5620V: Reduction sleeve Ø 113 mm / MK 5
- Fixed centering point MK 5
- Fixed and revolving centering point MK 5
- Quick change steel holder 7-C
- Steel holder 32 x 150 type D for square chisels
- Threading gauge
- Initial machine filling with quality oil
- Change gear set
- operating tool
Do not forget the lathe chuck!
| Digital position indicator | DPA 31 Plus |
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
Dr.-Robert-Pfleger-Str. 26
Deutschland / Germany
96103 Hallstadt
info@optimum-maschinen.de
If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.
