Productimage for CASADEI LIBRA 65/3 RRR 135
Brandimage to Product CASADEI LIBRA 65/3 RRR 135

Wide belt sander

CASADEI LIBRA 65/3 RRR 135

As a two- or three-band version with a sanding width of up to 1350 mm for maximum productivity and higher demands, optionally with transverse sanding unit

41.750,00 EUR excl. Tax / pc(s).
49.682,50 EUR incl. 19% Tax / pc(s).

Prices are recommended retail prices. Retailer prices may vary.

Art.-No. 5222507

Are you interested in this product?
  • Put a request
  • Find Trader
  • Productdetails

    • High-quality results in the processing of solid wood, veneer or raw material as well as for lacquer sanding
    • Heavy version of the entire machine
    • Operator panel with dust-tight membrane keypads on the front of the machine
    • Optimum cooling and long durability of the sanding belts (sanding belt length 2620 mm)
    • Automatic star-delta start
    • Motorized table height adjustment
    • Digital display for the working height
    • Electronically controlled sanding belt oscillation with reduced compressed air requirement
    • Natural rubber feed carpet with negative profile
    • Automatic carpet centering
    • Support table with two rollers in the infeed and outfeed of the feed carpet
    • Rubber rollers, in front of and behind each working unit
    • Flexible steel pressure rail in front of the first unit
    • Carpet feed via gear motor with two speeds
    • Pneumatic belt tension per unit with decimal correction possibility of the grain / belt thickness
    • Functional check on the control panel for circuit breaker, thermal protection switch, operating pressure and brakes
    • Optional RTC / RRTC design with planer shaft unit instead of the first sanding unit (with 520 indexable inserts with four cutting edges each)



    Execution RRR

    • 1. Unit R With diagonally grooved steel roller Ø 140 mm and fine adjustment
    • 2. Aggregate R with rubber-coated roller 65 Sh Ø 140 mm and fine adjustment
    • 3. Aggregate R with rubber-coated roller 45 Sh Ø 250 mm and fine adjustment


    Execution RRTC

    • 1. Unit R With diagonally grooved steel roller Ø 140 mm and fine adjustment
    • 2. Aggregate R with rubber-coated roller 65 Sh Ø 140 mm and fine adjustment
    • 3. Combination unit TC with rubber-coated roller 45 Sh Ø 140 mm and fine adjustment
    • Hard sanding pad (with screwed on graphite pad on exchangeable insert, fine adjustment
    • Switching the sanding shoe on / off from the control panel via pneumatic cylinder

     

    Dimensions and weights
    Length approx.1900 mm
    Width/depth approx.2580 mm
    Height approx.2390 mm
    Electrical Data
    Height adjustment motor power0.25 kW
    Feed motor output0.45/0.8 kW
    Drive motor output11 kW
    Supply voltage400 V
    Mains frequency50 Hz
    Extraction port
    Extraction port diameter3 x 200 mm
    Feed unit
    Feed speed4.5 / 9 m/min
    Sanding machine
    Sanding belt length2620 mm
    Sanding belt width1370 mm
    Max. sanding width1350 mm
    Workpiece
    Min. height4 mm
    Max. height170 mm
    VPE1
    Unit: pc(s).
    Packaging unit: 1

     

     

     

    If a guarantee is shown in the article description and/or in the description of the scope of delivery, your legal rights of liability for defects towards your seller remain unaffected. For the scope, duration, content and the guarantor, please refer to the guarantee conditions. We are not liable for printing errors, mistakes or incorrect presentation. Technical and optical changes are reserved. Fig. partly with optional accessories. Delivery is made exclusively according to our terms of delivery and payment. The sale is carried out via the specialized trade.

    Optional parts

    Optional parts can not be retrofitted and are available only when ordering new machines.